Active Member
|
[China]
Contact name:
Shen Zhen Xin Hui Li Industrial development co. LTD |
|
|
Operating principle:
1. Program editing: Real object compilation, and put the goods well
;
2. Store the edited program and call out the edited problem for
similar products.
3. Glue potting nozzle movement, pump body (driven by stepping
motor) for glue supply
4. Motion Trail: straight line, curve, point, box, circle, W type,S
type, can follow any irregular trajectory.
5, Z-axis up and down movement using ball shaft screw rapid
response.
6 Choose which glue, just choose on the control card.
The product application
1. LED Light bar category: small module, soft light bar, hard light
bar, etc
2. LED Lamps and lanterns: small module, wall washing lamp,
projection lamp, line lamp, etc
3 Electronics: waterproof power supply, transformer, circuit board,
etc
4. All kinds of non-standard pouring adhesive
A . Resin Glue Configuration : 10: 1 to 4: 1
| 1 | Mixing glue ratio | Resin from 10:1 to 4:1 |
| 2 | Stirring method | Dynamic stirring |
| 3 | Machine Route | 2000*400*100mm |
| 4 | Program mode | Teaching programming |
| 5 | Application product | Within 2 meters’LED strip , bar , moudule and lamps |
| 6 | External dimension | (L) 2400*(W)1050*(H)1480mm |
| 7 | Main pump A | 9CC/turn gear pump (Taiwan) |
| 8 | Addition pump B | 2.4CC/ turn gear pump (Taiwan) |
| 9 | Glue barrel Capacity | A:25L,B: 25L Deserve thermostat |
| 10 | Squeeze glue volum | 2-15g/s |
| 11 | Squeeze nozzle | Standard single nozzle, depending on different product, can choose multi nozzles. |
| 12 | Input pressure | 0.5-0.7Mpa |
| 13 | Machine power | 20000W |
| 14 | Supply Voltage | AC220V±10%,50HZ |
B.PU Glue disposition : 1:1
| 1 | Glue Ratio | PU Glue 3:1---1:1 |
| 2 | Stirring method | Dynamic Stirring |
| 3 | Machine Route | 2000*500*100mm |
| 4 | Programming methold | Teaching programming |
| 5 | Application products | LED strip , LED lamps and moudule within 2 meters |
| 6 | External dimension | 2400*1050*1480mm |
| 7 | pump A | 3.2CC/Turn Gear Pump ( Taiwan) |
| 8 | Pump B | 3.2CC/ Turn Gear Pump ( Taiwan |
| 9 | Glue Barrel Capacity | A: 25L, B 25: Constant temperature device |
| 10 | Squeeze glue flux | 2-15g/s |
| 11 | Squeeze glue nozzle | Standard single nozzle, according to different products , can fix multi nozzles |
| 12 | Input pressure | 0.5-0.7Mpa |
| 13 | Machine Power | 2000W |
| 14 | Voltage | AC220V±10%,50HZ |
Device configuration
| 1 | Control System | PLC+ SCM +7.2 inch touch screen |
| 2 | Software System | Independent research and development, English interface |
| 3 | Moving electronic Motor | YAKO independent research and development |
| 4 | Measuring pump | Precision adjustment wear resistant |
| 5 | Cut-off System | Independent research and development manufacturing |
| 6 | Mixing Arrangement | Independent research and development manufacturing |
| 7 | Stirring motor | OUTAI |
| 8 | Rack Material | Steel Structure |
| 9 | Slide Parts | A3*3mm Independent research and development manufacturing |
| 10 | Static mixer cleaning | Independent research and development manufacturing |
Characteristics of three - axis motion irrigation
1. Simple and convenient operation: touch screen display
operation;Full Chinese interface, record, display and alarm of
various parameters;According to each product to provide the
corresponding fixture, workers training simple, save training time
and training costs;
2. Precise control of glue quantity: all key components are
imported products, which can ensure high speed and precision and
meet the requirements of high reliability under automatic
production conditions.
Main features:
1. Glue dispensing, glue pouring integration, automatic operation,
one machine to achieve two functions.
2, the proportion setting adjustment, the amount of glue can be
adjusted.Ready to use at any time, the ratio of high precision,
according to the need ratio, save glue.
3, easy to operate, simple program editing, easy to disassemble and
convenient, directly put the two kinds of glue A and B into two
corresponding buckets, filling the glue, workers just need to press
the start switch.
4. According to the performance of glue, the barrel of A is
equipped with A constant temperature device, and the barrel of B is
well sealed to prevent volatilization. The liquid level induction
device will automatically alarm when the glue is lower than this
liquid level, and add corresponding glue
5. Convenient cleaning: the mixing pipe of A and B rubber mixture
only has the rubber outlet, so the cleaning part only has the
mixing pipe, and the other parts do not need to be cleaned. If you
need to stop for A period of time after work, you just need to
press the automatic cleaning button
Accept customized machines with your required size and function.
Service : Free testing , One year Warantee ,and lifetime Service
The glue suitable for double-liquid glue potting machine:
Suitable for all kinds of two-component glue, such as double-liquid
glue, AB glue, silica gel, epoxy resin, PU glue and so on
Welcome to customize your required measurement and function !
Service :Free testing , One year Warantee , Lifetime
service !
Package : Use Carton Package first , and external using Wooden
Frame . 
