Customization Ship/Boat Launching And Landing Inflatable Marine
Rubber Airbag
Product Description
The main supporting elements of the slip are air bag ( hereinafter
- AB) . Ship transferring from the building area to the slip is
produced approaching the deflated air bag under the vessel and
inflating with compressed air. The launching is made on the air
bags used as the rollers. This launch can be both uncontrolled and
controlled. In the latter case the launching speed is regulated by
the traction mechanism which is located at the head of the slip.
The distance between the air bags depends on the light-ship, the
length and width, but not more than 6 m from the bag centers. To
install the bag the space at least 25 cm in height and width at
least the half of the circumference of the air bag is required.
Air bag (hereinafter - AB) for upgrading and launching of vessels
and dragging heavy dimensional structures with flat basis (without
protrusions). Also suitable for use as a pneumatic jack. Pneumatic
bags are intended for ship transportation, repair and painting.
Specification
| Guaranteed Working Pressure |
| | | | | | |
JZ-3 | | | | | | |
JZ-4 | | | | | | |
JZ-5 | | | | | | |
JZ-6 | | | | | | |
Packing