Active Member
|
[China]
Address: FLAT/RM A 12/F KIU FU COMMERCIAL BLDG 300 LOCKHART ROAD WAN CHAI HK
Contact name:Andy
SENYDA(HK)Technology Limited |
|
|
Cisco Switch Power Supply Module PWR-C45-6000ACV Catalyst 4500
Series
Product Information
PWR-C45-6000ACV is a Cisco Catalyst Switch 4500 Series Switch Power
Supply, delivering 6000W AC power (Data and PoE) for Cisco 4500
switches.
Notice that PWR-C45-6000ACV= is similar with PWR-C45-6000ACV, except that PWR-C45-6000ACV= is a spare one.
Product Code | PWR-C45-6000ACV= |
Manufacturer | Cisco System Inc. |
Product Type | Power Supply Module |
Compatible product | Cisco Catalyst 4500-E Series Switches and classic chassis |
Power Input | 2800W Data and 4200W PoE Power |
Auto-Sensing | 110V (15A) / 220V (20A) |
Redundancy | Dual input power supply for additional redundancy |
Rated MTBF (Hours) | 341,356 |
More Details
The 6000 W AC-input power supply (PWR-C45-6000ACV), shown in Figure
A-1, is supported in following Catalyst 4500 E-series switch
chassis:
Figure A-1 6000 W Dual-Input AC Power Supply
1 | AC-input 2 receptacle | 4 | AC-input 1 receptacle |
2 | AC-input 2 on switch | 5 | Captive screws |
3 | AC-input 1 on switch | 6 | Remote power cycling terminal |
Table below shows 6000 W AC-Input Power Supply Specifications
AC-input type | Autoranging inputs with power factor correction Note : Power factor correction is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. |
AC-input voltage | Low-line (120 VAC nominal)—85 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max) |
AC-input current | 12 A (max) @ 120 VAC (for each input) 16 A (max) @ 230 VAC (for each input) |
AC-input frequency | 50/60 Hz (nominal) (±3% for full range) |
Power supply output capacity | 6000 W maximum |
Output holdup time | 20 ms minimum |
kVA rating5 | 6.8 kVA (power factor = 0.99) |
Heat dissipation | 2,720 BTUs/hr (approx.) |
Minimum software requirement | Cisco IOS Release 12.2(52)SG |
Power over Ethernet | Supported, up to 4800 W |
