Home Companies SENYDA(HK)Technology Limited

3000W Cisco Power Supply For Catalyst 6500 Switch WS-CAC-3000W= AC 120/230 V

SENYDA(HK)Technology Limited
Active Member

Contact Us

[China] country

Address: FLAT/RM A 12/F KIU FU COMMERCIAL BLDG 300 LOCKHART ROAD WAN CHAI HK

Contact name:Andy

Inquir Now

SENYDA(HK)Technology Limited

3000W Cisco Power Supply For Catalyst 6500 Switch WS-CAC-3000W= AC 120/230 V

Country/Region china
City & Province hong kong hong kong
Categories Switching Power Supply
InquireNow

Product Details

 

Original And New Cisco AC power supply Catalyst 6500 3000W WS-CAC-3000W=

 

Product Information

 

The 3000 W AC-input power supply designed for the Cisco Catalyst 6509-NEB-A Switch, called the WS-CAC-3000W, requires single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. We offer pre-owned and new WS-CAC-3000W power supplies to enhance your network.

 

The 3000 W AC-input power supply (WS-CAC-3000W) is supported in the following Catalyst 6500 series switches:

  • Catalyst 6506
  • Catalyst 6506-E
  • Catalyst 6509
  • Catalyst 6509-E
  • Catalyst 6509-NEB
  • Catalyst 6509-NEB-A
  • Catalyst 6509-V-E
  • Catalyst 6513
  • Catalyst 6513-E

 

Table 1 lists the specifications for the 3000 W AC-input power supply.

 

Specification
Description
AC-input typeAutoranging input with power factor correction (PFC).
Note Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components.
AC-input voltageLow-line (120 VAC nominal)—90 VAC (min) to 132 VAC (max)
High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max)
AC-input current16 A @ 200 VAC (3000 W output)
16 A @ 100 VAC (1400 W output)
AC-input frequency50/60 Hz (nominal) (±3% for full range)
Power supply output capacity1400 W maximum (100–120 VAC)https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif
3000 W maximum (200–240 VAC)
Front panel power connectorhttps://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gif,https://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifA two-pin male Molex connector is located in the lower right corner of the power supply front panel. The connector provides 42 VDC at a maximum of 17 A. This connector provides power to the WS-6509-NEB-UPGRD kit fan assembly through a power harness also provided in the kit. A hinged protective flap secured by a captive screw covers the connector when it is not in use.
Output holdup time20 ms minimum
kVA rating233520 W (total input power) or 3.6 KVA (high-line operation)
Heat dissipation12,046 BTU/hour (approx.)
Weight15.8 lb (7.2 kg)

 

Table 2 show the 3000 W AC-Input Power Supply LEDs

 

LED
Meaning
INPUT OKGreen—Source AC voltage is OK. (Input voltage is 85 VAC or greater.)
Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off.
FAN OKGreen—Power supply fan is operating properly.
Off—Power supply fan failure is detected.
OUTPUT FAILRed—Problem with one or more of the DC-output voltages of the power supply.
Off—DC-output voltages within acceptable margins.
Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal.
42V OKGreen—42 VDC is present at the fan power connector.
Off—42 VDC is not present at the fan power connector.

 

Show the appearance of WS-CAC-3000W=

Our Advantage

 

1.100% Cisco original factory sealed clean serial.
2. Extensive Real Inventory
3. Save up 50%-92% off the Global Price list
4. Flexible payment shipment
5. Unparalleled Experience Service

 

Shipping

 

1. Fast: in 2-3 days upon receipt of payment.
2. Safe: original package with protection foam in case of equipment broken in transportation
3. Economic: Low cost express fee via DHL, Fedex, TNT,EMS,Postal etc.
4. Flexible: We also ship to your Assigned Forwarder or Pickup by your forwarder

 

 

Hot Products

Cisco original new WS-C2960CX-8PC-L network Switch Detailed Images Detailed images of WS-C2960CX-8PC...
Original Cisco C2960CX 8 gigabit port switch WS-C2960CX-8TC-L Detailed Images Detailed images of WS...
Cisco WS-C2960X-24TS-LL Switch 2960x 24 port switch Detailed Images Detailed images of WS-C2960X...
Cisco switch 2960X 24 port switch gigabit network WS-C2960X-24TS-L Detailed Images Detailed images ...
Cisco 24 Port Gigabit Switches WS-C2960X-24TD-L Detailed Images Detailed images of WS-C2960X-24TD-L ...
Cisco Catalyst 2960X Series Gigabit Ethernet Switch WS-C2960X-48TS-LL Detailed Images Detailed ...