Home Companies World Connection Technology Co., Ltd

Catalyst 2960 48 10/100 + 2 1000BT LAN Base Image WS-C2960-48TT-L 64 MB DRAM

Contact Us

[China]

Trade Verify

Address: #6F HuaMei Business Building, Xinhu Road, Shenzhen, China.

Contact name:Lau

World Connection Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Catalyst 2960 48 10/100 + 2 1000BT LAN Base Image WS-C2960-48TT-L 64 MB DRAM

Country/Region china
City & Province shenzhen guangdong

Product Details

Catalyst 2960 48 10/100 + 2 1000BT LAN Base Image

 

Condition: Brand New Sealed

Availability: In stock

 

 

Model

WS-C2960-48TT-L

Format & Standards

Standards

IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification

Network Management Type

Other

 

Primary Ports

48 x 10/100Mbps ports
2 x 10/100/1000Mbps uplinks Port

Primary Port Speed

10/100Mbps + 1000Mbps

Data Transmission

MAC Address Table

8000

VLAN Support

Yes

Jumbo Frames

Yes

Details

Buffer Memory

64 MB DRAM
32 MB flash memory

Cabling

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).

LEDs

Per-port status: Link integrity, disabled, activity, speed, full-duplex
System status: System, RPS, link status, link duplex, link speed

Power

100-240VAC (autoranging) , 1.3-0.8A, 50-60 Hz

 

 

Features

 

Ease of Use and Deployment
Superior Redundancy for Fault Backup
Integrated CISCO IOS Software Features for Bandwidth Optimization
Advanced QoS
Granular Rate Limiting
Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports.
Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.
Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward.
SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.
Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure intrusion detection system (IDS) to take action when an intruder is detected.
TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration.
MAC address notification allows administrators to be notified of users added to or removed from the network.
DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port.
DHCP Interface Tracker (Option 82) feature augments a host IP address request with the switch port ID.
Port security secures the access to an access or trunk port based on MAC address.
After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port.

 

 

Dimensions

 

17.5" x 9.3" x 1.7"

Weight

8.0 lbs.

 

 

Temperature

32 to 113°F (0 to 45°C)

Humidity

10 to 85% (noncondensing)

 

 

Disclaimer

 

Registration Phone

1-800-Go-Cisco

 

 

 

Shipping

 

Delivery OptionsEstimated Delivery Time
DHL2-3WORKING DAYS
FEDEX2-4WORKING DAYS
TNT2-5WORKING DAYS

 

Please note: Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.

 

Return Material Authorization (RMA) Process

If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

 

Payment Methods

Wire Transfer/Money Gram/Western Union

 

Hot Products

Cisco Catalyst 2960-PLUS 48TC-L Managed Switch - 48 Ethernet Ports & 2 Combo Gigabit SFP Ports ...
Cisco Catalyst Switch 2960-24PC Layer 2 – 24 x 10/100 PoE Ports – 2 x T/SFP – LAN Base Image- ...
Cisco Catalyst 2960 48 10/100 + 2 T/SFP LAN Base Image Condition: Brand New Sealed Availability: In ...
Catalyst 2960 48 10/100 + 2 1000BT LAN Base Image Condition: Brand New Sealed Availability: In stock ...
Detail:Cisco Catalyst switch 2960 48 Port 10/100/1000, 4 T/SFP LAN Base Image WS-C2960G-48TC-L – ...
WS-C2960S-48FPD-L Catalyst 2960S 48 GigE PoE 740W, 2 x 10G SFP+ LAN Base Brand Cisco Systems, Inc. ...