Active Member
|
[China]
Address: 1705 New Union Building
Contact name:Admine
Zhongli（Shandong) Steel Group Co., Ltd |
|
|
50-500mm ppgi/gi zinc cold rolled/hot dipped galvanized steel coil/sheet/plate
| Specifications of PPGI and Substrate |
Specification of PPGI coil:
| Thickness | Color | Coil Weight | Coating of back | Coating of front |
| 0.15mm~2.0mm | RAL color | 3~8 Tons | 5~10µ | 15~20µ |
Specification of Substrate:
50-500mm ppgi/gi zinc cold rolled/hot dipped galvanized steel coil/sheet/plate
| Substrate | Hot dipped galvanized steel (SGCC,SGCD,SGCE) |
| Steel Grade | DX51D+Z~DX56D+Z,DC51D,Q195,Q235,Q235A,ST02Z,CS-B,etc |
| Standard | JIS G3302-2007, GB/T2518-2008,ST02Z, DIN EN 10327, ASTM A653 |
| Thickness | 0.14mm~1.0mm |
| Width | 600mm~1250mm |
| Zinc Coating | Z40~Z60/ Z80~Z100/ Z120~Z150/ Z275 |
| Spangle | regular spangle,minimized spangle |
| Edge | mill edge,cut edge |
Electro galvanized steel (SECC,SECD,SECE)
| Substrate | electro galvanized steel (Anti-Fingerprinting) |
| Steel Grade | DC01+ZE, SECCN5, CR4, ZStE180BH+ZE,etc |
| Standard | JIS G3302-2007, GB/T2518-2008,DIN EN 10327, ASTM A653 |
| Thickness | 0.14mm~1.0mm |
| Width | 600mm~1250mm |
| Zinc Coating | E8,E16,E24,E32 |
| Edge | mill edge,cut edge |
50-500mm ppgi/gi zinc cold rolled/hot dipped galvanized steel coil/sheet/plate
| Steel Grade | Q195, Q215, Q235, Q275, SPCC, SPCD, SPCE, ST12 |
| Standard | JIS G3302-2007, GB/T2518-2008,DIN EN 10327, ASTM A653 |
| Thickness | 0.14mm~1.0mm or as request |
| Width | 600mm~1250mm or as request |
PPGI Steel Coil Introduction
PPGI is pre-painted galvanized iron, also known as pre-coated steel, zinc coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate. PPGI is an industrial steel product with multiple uses. It is a form of galvanized iron that is also dipped into zinc. However, the zinc coat is pre-painted in the factory instead of wait until after the steel is formed. Applying a zinc coat prevents rusting. PPGI is also known as metallic coated steels, or pre-coated steel. This product will typically come in the form of a coil. This steel is often not costly and can last for a long period of time.
The hot dip metallic coating process is also used to manufacture steel sheet and coil with coatings of aluminium, or alloy coatings of zinc/aluminium, zinc/iron and zinc/aluminium/magnesium which may also be factory pre-painted. While GI may sometimes be used as a collective term for various hot dip metallic coated steels, it more precisely refers only to zinc coated steel. Similarly, PPGI may sometimes be used as a general term for a range of metallic coated steels that have been pre-painted, but more often refers more precisely to pre-painted zinc coated steel.
Zinc coated steel substrate for PPGI is typically produced on a continuous galvanizing line (CGL). The CGL may include a painting section after the hot dip galvanising section, or more commonly the metallic coated substrate in coil form is processed on a separate continuous paint line (CPL). Metallic coated steel is cleaned, pre-treated, applied with various layers of organic coatings which can be paints, vinyl dispersions, or laminates. The continuous process used to apply these coatings is often referred to as Coil Coating.
Application of PPGI Coils
Pre-painted galvanized steel combines utility with beauty. It consists of tin, chrome, zinc or paint, which are the extra finish applied to the natural steel surface. The application of coating is to protect the surface of steel from oxidation and it is also used to enhance requirements for visual appearance.
