SS210S 201 Stainless Steel Plate 19 Gauge 1.0mmx1220mmx2440mm

1.0mm*1220mm*2440mm 201 210S Stainless Steel Sheet

Stainless Steel Sheet & Plate Introduction

301 stainless steel is known as one of the most commonly used martensitic steels. It contains over 11.5% chromium, making it moderately resistant to corrosion. Martensite 301 can be hardened by heat treatment and has a wide range of properties. Whether annealed or hardened, 301 stainless steel retains its magnetic properties. Due to its hardenability, its weldability may be reduced accordingly. Its application is also limited by the working temperature, the strength decreases when the working temperature is high, and the ductility decreases when the working temperature is low. Grade 301 is suitable for applications requiring high strength but moderate corrosion and heat resistance.

301 stainless steel has good tensile strength, creep strength and fatigue strength, but has slight corrosion resistance. After annealing, it can be moderately stretched and formed with fairly good cold workability. Heat treatments for Grade 301 include annealing, hardening, quenching, tempering and stress relieving. As a martensitic steel, Type 301 is one of the most difficult stainless steels to weld. The chemical balance gives stainless steel 301 higher strength and hardness, but less ductility.

Stainless Steel Sheet Parameter

Stainless Steel Sheet

• Usually less than 6mm thick
• Thinner than SS plate
• Lightweight residential and architectural applications

Stainless Steel Plate

• Usually thicker than 6mm
• High tensile strength
• Good durability
• Heavy-duty applications

301 Stainless Steel Sheet & Plate

301 stainless steel is a stainless steel grade produced according to the American ASTM standard, which is equivalent to my country's 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon content, 13% chromium content, 301 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 301 stainless steel heat treatment: solution treatment (℃) 800-900 slow cooling or 750 fast cooling. 301 stainless steel chemical composition: C≤0.15, Si≤1.00, Mn≤1.00, P≤0.035, S≤0.030, Cr=11.50~13.50.

301 Stainless Steel Sheet & Plate Features

1) High strength;
2) Excellent machinability
3) Hardening occurs after heat treatment;
4) Magnetic;
5) Not suitable for harsh corrosive environment.
3. Scope of application
 

Blades in general, mechanical parts, cutlery class 1 (spoons, forks, knives, etc.).

Stainless Steel Sheets Applications

1) Steam turbine
2) Jet engine
3) Gas turbine
4) Steam valve
5) Tray valve
6) Pump shaft
7) Turbine blades
8) Bolts
9) Flat spring
10) Knife
11) Kitchen Utensils
12) Hand tools
13) Miscellaneous
Applicable standards: ASTM A276, ASTM A240, ASTM A580, ASTM A479, ASTM A959, ASTM A473, ASTM A314, SAE J405, etc.