90s Billet Continuous Casting Machine Ccm Deburring 80mm

Continuous casting billet deburring machine Continuous Casting Machine

Product profile

The continuous casting billet deburring function can effectively and quickly remove the burr of billet, prevent the impact on the surface quality of finished steel rolling products, and ensure the quality of steel rolling. The equipment uses the round scraper to remove the burr of billet in the process of moving, which plays an important role in improving the removal rate of burr and ensuring the quality of continuous casting billet

There are two types of continuous casting billet deburring machine: scraper type and hammer type.

Equipment model

Technical indicators

Suitable for casting billet: hot casting billet, online deburring
Casting temperature: 500 ~ 900℃
When deburring, casting speed: maximum 20m/min
Concave curvature of cast slab: maximum 15mm/m
Minimum spacing between front and rear billets: 3000mm
Deburring cycle time: 40 ~ 90s
Vertical stroke of deburring scraper: maximum 150mm
Air spring stroke: 80mm
Small cylinder stroke: 70mm
Deburring beam rotation Angle: 90°
Rotary cylinder stroke: 320mm
Air cleanliness: clean compressed air
Air source pressure: 0.55 ~ 0.7mpa
Air output: 400N m 3 /min
Water quality: purified water for industrial use
Water pressure: 0.4 ~ 0.55mpa
Flow rate: 4m 3 /h

Equipment composition

Deburring machine is mainly composed of front lifting seat, deburring beam, rear lifting seat, rotating cylinder, electrical system and position detection switch.
The front lifting seat includes:
Lifting bracket, oil cup, bearing seat, air spring, etc.; The air spring inflates, the bearing seat rises and drives the deburring beam to rise. Schedule 40 mm
(2) Deburring beam includes:
Deburring shaft, cylinder, cylinder lifting air chamber, cooling water circuit, scraper blade
The rear lifting seat includes:
The air spring inflates, the bearing seat rises and drives the deburring beam to rise. Schedule 40 mm
④ Rotating cylinder:
After the scraper removes the billet burrs, the cylinder drives the deburring beam to rotate 90 degrees, and the burrs scraped down are dumped into the lower hopper

⑤ Scraper type:
Square scraper, round scraper
⑥ Scraper lifting mode:
Independent cylinder, independent spring
⑦The electrical system and position detection switch includes:
PLC control unit, operating table, proximity switch, laser counter sensor for slab detection and pneumatic control cabinet