Hebei Wansheng Environmental Protection Engineering Co., Ltd |
|
Our Fire Protection Storage Tanks are bolted steel potable water storage tanks ranging in size from 30 cubic meters to 20,000 cubic meters. It is an integrated tank sealed by highly corrosive bolts and flexible sealants. All of our tanks are rugged, corrosion resistant and easy to install with no seams, welds or joints to leak or rust.
Wansheng Environmental Engineering Co., Ltd. produces fire protection water storage tanks engineered to meet or exceed AWWA D103-09 and EN/ISO28765:2011. Our tank engineers perform tank engineering calculations for each specific tank structure based on the local environmental conditions of the project, such as snow load, wind speed, seismic zones, etc., to ensure adequate safety of the tank structure in long-term use.
Fire Protection Storage Tanks are manufactured from quality materials that meet AWWA, NFPA and FM Global standards, making them long-lasting and durable. They last similar to or longer than concrete or welded tanks. Unlike competitive products, they can easily be repaired by unbolting the damaged part, replacing it and installing new gaskets and fasteners.
characteristic | Concrete | Carbon steel tank | Fire Protection Storage Tanks | LIpp tank |
Beautiful degree appearance | Low | Low | High | High |
Temperature adaption | A stress | Adapt to low temperature | Adapt to low temperature | Adapt to low temperature |
Shape | Any shape | Round shape | Round shape | Round shape |
Ground or underground | Both | Ground | Both | Ground |
Easy to clean | Bad | Bad | Good | Normal |
Easy to repaire | Normal | Good | Good | Bad |
Glass-fused-steel roofs with external/internal beams
- Gas-tight, GFS/enamel roofs for anaerobic digestion conditions
- Conical roof with external/internal beams on request
- Optimum material is the same as the tank sidewalls
Aluminum tank top cover
- Economical choice for potable water, wastewater and fire water storage, etc.
- Rain and wind proof only, no airtightness
Single and double membrane roofs
- Suitable for biogas collection purposes under anaerobic digestion conditions
- One-piece AD tank with covered roof and airtightness
Fiberglass roof
- Suitable for situations where no gas tightness is required, such as potable water, agriculture, fire water and wastewater storage.
- FRP roofs can be shaped as domes or flat roofs
Aluminum dome roofs
- Self-supporting without support columns
- No airtightness
Laser Cutting:create sheets with special dimensions or cut outs
Spraying
Enamelling
Firing
Our professional engineers design according to rigorous international standards to ensure the tank quality.
Our tanks are conform to following standards,