Active Member
|
[China]
Address: No.298th, ZhongHua North Street,050065,Shijiazhuang City,Hebei Province,China.
Contact name:Liu
HUATAO LOVER LTD |
|
|
10mm 600 Degrees Brown Color High Temperature Resistance Pbo And Kevlar Felt Pads
HIGH TEMPERATURE FELT PADS
High temperature felt pad
PBO felt pad also known as Felt strip, Industrial Felt Belt etc. It is made of high temperature fiber PBO + Kevlar fiber + high temperature fabric,The color is brown + yellow,up to 600c degrees high temperature,for the extruder discharge port,that could improve the scratch and black marks caused by graphite,especially suitable for the production of aluminum products with high requirements,if it is Heavy-duty extruders, PBO blocks can also be used as a movable beam for their first-stage cooling beds.
SPECIFICATION
| Product Number | Color | Composition |
| HPK | Brown 600℃ | PBO Outside + Kevlar Inside |
| HK | Yellow 500℃ | 100% Kevlar |
| HKC | Green 500℃ | Kevlar+Carbon mixture |
| HN | Off White 300℃ | 100% Nomex |
| HP | White 200℃ | 100% Polyester |
Available Size(mm) | width:10-2000;length:10-2500 | |
| Thickness(mm) | 6,8,10,12 | |
If you have any question or demands,kindly contact our prefessional team,we will give you the best solution according to your machine,operation temperature and our rich production experience.
ADVANTAGE
1.Heat resistant up to 600℃
2.No elongation under high tension and heavy load
3.No seam, splice or joints: no breaks due to weak zone,High density structure
4.Smooth and even belt surface: scratch-free extrusions
5.Excellent belt tracking on the cooling table
6.Low heat conductivity and high density with good wear resistance and impact resistance property under heavy conditions
APPLICATION
Pbo+Kevlar Pad is mainly applied to extrusion machine’s run out table to replace the graphite material,
Our company solemn promise: my product will never appear fluff, tear, off the net, delamination, scales, deviation, elongation, deformation, aluminum pollution and other phenomena; provided by the original materials from the United States DuPont original factory Genuine. Product technical indicators in full compliance with DuPont's temperature, wear performance parameters.
Design Your Belt
Operation Temperature: 200℃,300℃,500℃,600℃
Your operation temperature:_____
Material:pbo/kevlar/aramid/Nomex/polyester
Your request material:__________
Thickness:6mm,8mm,10mm
Your request width:____________
Width and length can be customed
Your
request:_________________
Contact us to get the quotation details.
