Active Member
|
[China]
Address: No.298th, ZhongHua North Street,050065,Shijiazhuang City,Hebei Province,China.
Contact name:Liu
HUATAO LOVER LTD |
|
|
Geogrid Reinforcing Fabric HIgh Strength Polyester Warp Knitted Geogrid
High Strength Warp Knitted Polyester Geogrid Description
High-strength polyester geogrid is a new type of enhanced quality subgrade geotextile substrate, the use of high-strength polyester fiber or polypropylene fiber as raw material, weaving through the warp direction, with a special coating treatment from dipping.
Polyester Geogrid Specification
1. Mesh Size: conventional geogrid mesh size of 12.7mm and 25.4mm.
2. Width : 2m, 4m and 6m. Or as request.
3. Customized request: geogrid strength, width and mesh size can be
customized according to your request.
4. Loading: 20ft container, 40ft high container
Polyester Geogrid Performance
has a very high tensile strength
low elongation
corrosion resistance, aging
the base material has a strong bite force
light weight, there is drainage
Polyester Geogird Application
Various road soft soil subgrade reinforcement 1, roads, railways, roads and other municipal enhanced, can effectively improve the strength of subgrade, delaying reflection cracks in the road.
Water Project dams, channel reinforced, isolation, reinforcement of soft soil foundation, enhance its defense capabilities, improve the bearing capacity and stability.
For embankment reinforcement, retaining wall reinforcement, enhance the overall strength
Polyester Geogrid Specification
| Properties | Test Method | Unit | PET 30/30 | PET 40/40 | PET 50/50 | PET 80/80 | PET 100/100 | PET 120/120 | PET 140/140 | ||
| •Ultimate tensile strength | MD | ASTM D 6637 | ≥KN/M | 30 | 40 | 50 | 80 | 100 | 120 | 140 | |
| CD | 30 | 40 | 50 | 80 | 100 | 120 | 140 | ||||
| •Elongation at maximum load | MD | ASTM D 6637 | % | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
| CD | 13 | 13 | 13 | 13 | 13 | 13 | 13 | ||||
| •Approximate mesh size | - | MM | 12.7x12.7 25.4x25.4 50x50 | ||||||||
| •Roll Width | - | M | 3.95 or 5.95 | 3.95 or 5.95 | 3.95 or 5.95 | 3.95 or 5.95 | 3.95 or 5.95 | 3.95 or 5.95 | 3.95 or 5.95 | ||
| Properties | Test Method | Unit | PET 150/150 | PET 200/200 | PET 260/260 | PET 300/300 | PET 400/400 | PET 500/500 | PET 600/600 | |
| •Ultimate tensile strength | MD | ASTM D 6637 | ≥KN/M | 150 | 200 | 260 | 300 | 400 | 500 | 600 |
| CD | 150 | 200 | 260 | 300 | 400 | 500 | 600 | |||
| •Elongation at maximum load | MD | ASTM D 6637 | % | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
| CD | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |||
| •Approximate mesh size | - | MM | 25x25 40x40 50x50 | |||||||
| •Roll Width | - | M | 1-5 | 1-5 | 1-5 | 1-5 | 1-5 | 1-5 | 1-5 | |
| Properties | Test Method | Unit | PET 700/700 | PET 800/800 | PET 900/900 | PET 1000/1000 | - | - | - | |
| •Ultimate tensile strength | MD | ASTM D 6637 | ≥KN/M | 700 | 800 | 900 | 1000 | - | - | - |
| CD | 700 | 800 | 900 | 1000 | - | - | - | |||
| •Elongation at maximum load | MD | ASTM D 6637 | % | 13 | 13 | 13 | 13 | - | - | - |
| CD | 13 | 13 | 13 | 13 | - | - | - | |||
| •Approximate mesh size | - | MM | 25x25 40x40 50x50 | - | ||||||
| •Roll Width | - | M | 1-5 | 1-5 | 1-5 | 1-5 | - | - | - | |
