|
[China]
Trade Verify
Address: No.1 Yunan Road, Guangzhou Civilian Science & Technology Park, Taihe, Guangzhou, China.
Contact name:Kris Ke
GUANGZHOU BAIYUN TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
BAIYUN® SS850 Neutral Silicone Sealant Goodextrusionandthixotropy,easytouse
BAI YUN® SS850 Neutral Silicone Sealant
Features
Good extrusion and thixotropy between 4℃~+40℃. Easy to use
Neutral curing, non-corrosive curing system
No unpleasant odor during curing
Excellent resistance to weather, UV, ozone, water
Good adhesion to most common building material
Good compatibility with other neutral silicone sealants
Composition
RTV silicone sealant
Applications
Sealing gaps or joints of doors and windows
Sealing joints
Many other uses
Typical properties
| Property | Result | Test method |
| Uncured-As Tested at 23°C (73°F) and 50% RH | ||
| Specific Gravity | 1.5 | ASTM D1475 |
| Working time(23°C/73°F, 50% RH) | 10-20minutes | |
| Tack-free time(23°C/73°F, 50% RH) | 30-60 minutes | ASTM C679 |
| Curing time(23°C/73°F, 50% RH) | 7-14 days | |
| Flow, Sag or Slump | ＜0.1mm | ASTM C639 |
| VOC Content | ＜39g/L | |
| As Cured-After 21 days at 23°C (73°F) and 50% RH | ||
| Durometer Hardness, Shore A | 20-60 | ASTM C661 |
| Peel Strength | 28lb/in | ASTM C794 |
| Joint Movement Capability | ±12.5% | ASTM C719 |
| Tensile Adhesion Strength | ||
| AT 25% elongation | 0.175MPa | ASTM C1135 |
| AT 50% elongation | 0.268MPa | ASTM C1135 |
| Specifications:Typical property data values should not be used as specifications. Assistance with specifications are available by contacting Guangzhou Baiyun Chemical Industry CO., LTD. | ||
Specifications
·ASTM C920; Type S, Grade NS, Class 12.5, Use NT, A, G, M, O
Colors
Black, gray and white (standard colors)
Other wide variety of colors (customized)
Package
300 mL cartridge and500 mLsausage
Storage and shelf life
12 months from the date of manufacture when stored at or below 27ºC (80ºF) in the original unopened containers.
Product limitation
This product should not be used,applied or recommended:
In structural glazing applications or where the sealant is intended as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as thesealant requires atmosphericmoisture for cure.
On frost-laden or damp surfaces
To building materials that bleedoils, plasticizers or solvents –materials such as impregnatedwood, oil-based caulks, green orpartially vulcanized rubber gasketsor tapes.
In below-grade applications
On substrates made of PP, PE, PC, PMMA and PTFE.
Where movement capability greater than ±12.5% is required.
Where painting of the sealant isrequired, as the paint film maycrack and peel
For structural adhesion on bare metals or surfaces subject tocorrosion (i.e., mill aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the productwill be in continuous contact with water.
New concrete must be allowed to cure and dry for at least 7 days of good drying weather.
Handling and safety
Product safety information required for safe use is not included in this document. before handling, read product and material safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available from baiyun sales application engineer, or distributor, or by calling baiyun customer service.
How to use
Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product
Health and environment information
For information and advice regarding transportation,handling,storage and disposal of chemical products,users should refer to the actual Material Safety Data Sheets containing physical,ecological toxicological and other safety-related data.
