|
[China]
Trade Verify
Address: Plant NO.1,No.28,YinzhuRoad,New District,Suzhou,Jiangsu,China
Contact name:Barry Wang
Suzhou Ephood Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
MR95 Series Pressure Fisher Gas Regulator For Fired Heaters
And Boilers
Fisher MR95 Series Pressure Regulator
Fuel Gas Pressure Control Solutions for Fired Heaters and Boilers
MR95 Series regulators are compact, large-capacity, direct-operated pressure regulators. Typical applications include superheated steam, steam injection, steam tracing, nitrogen purging, boiler feed water, process chemicals, cooling water, test fixtures, wash tanks, sterilizers/autoclaves, fuel lines, pneumatic supply, and many others.
This product can help solve the toughest pressure control applications. Typical applications include superheated steam, steam injection, steam tracing,nitrogen purging, boiler feed water, process chemicals, cooling water, test fixtures, wash tanks, sterilizers/autoclaves, fuel lines, pneumatic supply, and many others.
Available Constructions
Type MR95L: Pressure reducing regulator for outlet pressures from 2 to 30 psig / 0.14 to 2.1 bar.1/4 in. to 1 in. body sizes only.
Type MR95H: Pressure reducing regulator for outlet pressures from 5 to 150 psig / 0.34 to 10.3 bar.
Type MR95HP: Pressure reducing regulator for outlet pressures from 15 to 400 psig / 1.0 to 27.6 bar (soft-seated).
Type MR95HT: High temperature pressure reducing regulator for outlet pressures from 15 to 300 psig / 1.0 to 20.7 bar (metal seat) and up to 650°F / 343°C.
Type MR95LD: Pressure reducing differential regulator for differential set pressures from 2 to 30 psi / 0.14 to 2.1 bar with maximum inlet pressure up to 300 psi / 20.7 bar and maximum outlet pressure up to 125 psi / 8.6 bar. 1/4 in. to 1 in. body sizes only.
Type MR95HD: Pressure reducing differential regulator for differential set pressures from 5 to 150 psi / 0.34 to 10.3 bar with maximum inlet/outlet pressures up to 300 psig / 20.7 bar.
Type MR95HDP: Pressure reducing differential regulator for differential set pressures from 5 to 150 psi / 0.34 to 10.3 bar with maximum inlet/
outlet pressures up to 600 psi / 41.4 bar.
Body and Orifice Sizes
1/4 NPT body:
0.284 in. / 7.22 mm orifice
1/2 in. / DN 15 body:
0.416 in. / 10.56 mm orifice
3/4 and 1 in. / DN 20 and 25 bodies:
0.631 in. / 16.02 mm orifice
1-1/2 and 2 in. / DN 40 and 50 bodies
(not available for Types MR95L and MR95LD):
1.142 in. / 29 mm orifice
Features
• Handwheels/Tee Handles—Allow easypressure setting changes and are standard on Types MR95LD, MR95HD and MR95HDP and optional on the Types MR95L, MR95H, MR95HP and MR95HT regulators.
• Versatile—Can be used with all process media including air, steam, gas, water, liquids (oils and process chemicals) and oxygen.
• Tight Shutoff With Elastomer Seats—Metal seats available for high temperatures.
• Direct-Operated—Design maximizes speed of response.
• Robust—Up to 1000 psig / 68.9 bar inlet pressure.
| Available Low Pressure Configurations | MR95L: 2 to 30 psig / 0.14 to 2.1 bar outlet pressures |
| Available High Pressure Configurations | MR95H: 5 to 150 psig / 0.35 to 10.3 bar outlet MR95HP: 15 to 400 psig / 1.0 to 27.6 bar outlet MR95HT: 15 to 300 psig / 1.0 to 20.7 bar outlet and up to 650°F / 343°C |
| Available Pressure Differential Configurations | MR95LD: 2 to 30 psi / 0.14 to 2.1 bar differential MR95HD: 5 to 150 psi / 0.35 to 10.3 bar MR95HDP: 5 to 150 psi / 0.35 to 10.3 bar with max inlet of 600 psig / 41.4 bar |
| Body and Spring Case Materials | Gray Cast Iron WCC Steel LCC Steel Stainless Steel Special Alloys: Monel®, Hastelloy® C, Aluminum-Bronze Contact Sales Office for Special Alloys |
| Body Size | 1/4-inch 1/2-inch / DN 15 3/4 and 1-inch / DN 20 and 25 1-1/2 and 2-inch / DN 40 and 50 (not available for Types MR95L and MR95LD) |
| End Connection Styles | NPT,Flange |
| Maximum Inlet Pressure | 1000 psig / 69 bar |
| Maximum Outlet Pressure | 450 psig / 31 bar |
| Pressure Registration | Internal or External |
