Active Member
|
[China]
Address: XINKAI PUDING CHENGJIAO TOWN, CONGHUA, GUANGZHOU, CHINA
Contact name:wayson
guangzhou sanya motorcycle co. ltd |
|
|
CG Engine 125CC/150CC Ordinary Engine Motorcycle engine 4 Strokes
125CC
Max. Torque:8.5N.m/7500±375r/min
Max.Power:8.0Km/8500±425r/min
Min. Fuel Consumption:367g/Kw.h
Displacement:125cc
Compression ratio:9.2:1
Cylinder diameter × piston stroke:56.5 ×49.5 mm
150CC
Max. Torque:1.0N.m/7000±375r/min
Max.Power:8.5Km/8500±425r/min
Min. Fuel Consumption:354g/Kw.h
Displacement:150cc
Compression ratio:9.0:1
Cylinder diameter × piston stroke:62.0 ×49.5 mm
Description:
Details as follow,
| 125 CC Engine Parameter | ||
| NO. | Item | Parameter in English Name |
| 1 | Model | single cylinder,4-stroke,air cool, diagonal type |
| 2 | Max net power and the corresponding rotating speed | 8.0KW,8500±425r/min |
| 3 | Calibration power and the corresponding speed | 7.0KW,8000±400r/min |
| 4 | Max torque and the corresponding speed | 8.5.0N·m,7500±350r/min |
| 5 | Minimum fuel consumption rate | 367g/KW·h |
| 6 | Minimum no-load stable speed (idle) | 1400±100r/min |
| 7 | Compression ratio | 9.2:1 |
| 8 | Cylinder diameter × piston stroke | 56.5.0mm×49.5mm |
| 9 | Cylinder working volume | 124.1ml |
| 10 | Spark advance angle | 15°±2°~35°±2° |
| 11 | The turning of output shaft | Anticlockwise |
| 12 | Ignition method | C·D·I |
| 13 | Lubrication method | Pressure and splash lubrication at the same time |
| 14 | Valve clearance (20 ± 10 ° C) | Intake valve:0.03～0.05mm |
| Exhaust valve:0.03～0.05mm | ||
| 15 | Idle emission | CO≤2.0% |
| 16 | HC≤250ppm | |
| 17 | Clutch model | Multi-disk wet clutch |
| 18 | Transmission model | Fifth gear |
| 19 | Starting method | Kick + Electric start |
| 20 | Carburetor | CPZ26 |
| 21 | Magnetic motor | inner-rotor flywheel magneto |
| 22 | Spark plug | D8RC |
| 23 | Oil bump | Rotor type |
| 24 | Starting motor | 12 V DC |
| 25 | Gasoline | RQ above 90# unleaded gasoline |
| 26 | Lubrication oil type | SAE 15W/40 SE |
| 27 | Lubricating oil consumption rate | 8 g/kw·h |
| 28 | Filling amount of lubrication | 1.0L |
| 29 | Dimensions (Length/Weight/Height) | 361mm×328mm×429mm |
| 30 | Net weight | 31.5kg |
| 150CC Engine Parameter | ||
| NO. | Item | Parameter in English Name |
| 1 | Model | single cylinder,4-stroke,air cool, diagonal type |
| 2 | Max net power and the corresponding rotating speed | 8.5KW,8500±425r/min |
| 3 | Calibration power and the corresponding speed | 7.5KW,8000±400r/min |
| 4 | Max torque and the corresponding speed | 10.0N·m,7000±350r/min |
| 5 | Minimum fuel consumption rate | 354g/KW·h |
| 6 | Minimum no-load stable speed (idle) | 1500±100r/min |
| 7 | Compression ratio | 9.0:1 |
| 8 | Cylinder diameter × piston stroke | 62.0mm×49.5mm |
| 9 | Cylinder working volume | 149ml |
| 10 | Spark advance angle | 15°±2°~35°±2° |
| 11 | The turning of output shaft | Anticlockwise |
| 12 | Ignition method | C·D·I |
| 13 | Lubrication method | Pressure and splash lubrication at the same time |
| 14 | Valve clearance (20 ± 10 ° C) | Intake valve:0.03～0.05mm |
| Exhaust valve:0.03～0.05mm | ||
| 15 | Idle emission | CO≤2.0% |
| 16 | HC≤250ppm | |
| 17 | Clutch model | Multi-disk wet clutch |
| 18 | Transmission model | Fifth gear |
| 19 | Starting method | Kick + Electric start |
| 20 | Carburetor | PZ27 |
| 21 | Magnetic motor | inner-rotor flywheel magneto |
| 22 | Spark plug | D8RC |
| 23 | Oil bump | Rotor type |
| 24 | Starting motor | 12 V DC |
| 25 | Gasoline | RQ above 90# unleaded gasoline |
| 26 | Lubrication oil type | SAE 15W/40 SE |
| 27 | Lubricating oil consumption rate | 8 g/kw·h |
| 28 | Filling amount of lubrication | 1.0L |
| 29 | Dimensions (Length/Weight/Height) | 350mm×329mm×430mm |
| 30 | Net weight | 32kg |
