Active Member
|
[China]
Address: 301-64 Hexin Road, High-Tech District, Chengdu 610000, China
Contact name:Cai Qiang
Jigren Systems Co.,Ltd |
|
|
20kW CHP Combined Heat Power
Descriptions
1. Accordant with consumer requirement
2. Simplified engine start/stop control
3. Complete control solution
4. Enhanced stability and safety
5. Convenient remote monitor and service
6. Special welded base frame
7. With high quality paint, endurable brightness as well resistance against abrasion and defacing
8. Installation manual, operation and maintenance manual circuit diagram
| Model | Elec. Power (kW) | Efficiency | Fuel Type | Engine Model | Alternator | Genset Controller | ||||
| Elec. | Thermal | Total | Manufacturer | Model | Manufacturer | Model | ||||
| JIG20NSC-AS | 18 | 30.1% | 62.1% | 92.20% | NG | U91864N | Mecc Alte | ECP28 VL4 A | ComAp | IS-NTC-BB |
| JIG20N6SC-AS | 20 | 30.1% | 62.1% | 92.20% | NG | U91864N | Mecc Alte | ECP28 VL4 A | ComAp | IS-NTC-BB |
| Genset | Genset Model | JIG20NSC | JIG20N6SC | |
| Prime Rating | kW | 18 | 20 | |
| KVA | 22.5 | 25 | ||
| Standby Power | kW | 20 | 22 | |
| KVA | 25 | 27.5 | ||
| Rated Voltage | V | 230/400 | 230/400 | |
| Rated Current | A | 32.5 | 36.1 | |
| Power Factor | - | 0.8 | 0.8 | |
| Rated Frequency | Hz | 50 | 60 | |
| Rated Speed | rpm | 1500 | 1800 | |
| CHP parameters | Heat Output | kW | 37.1 | 41.3 |
| Flow of Hot-water | T/h | 1.52 | 1.52 | |
| Thermal | % | 62.1 | 62.1 | |
| Total | % | 92.2 | 92.2 | |
| Note: Based on 50 ℃ input hot water and 70 ℃ output water. | ||||
| Spec | Dimensions (Open) (L × W × H) | mm | 1900×850×1150 |  | |||||
| Net Weight (Open) | kg | 790 | |||||||
| Dimensions (Silent Canopy) (L × W × H) | mm | 1980×900×1200 |  | ||||||
| Net Weight (Silent Canopy) | kg | 960 | |||||||
