QINGDAO HIOUNCE HVAC EQUIPMENT CO.,LTD |
Verified Suppliers
|
|
Natural Gas Or LPG Wall Hung Condensing Stainless Steel Heating And
Bathing Boiler 32kw
GAS WALL HANGING BOILER INSTRUCTIONS
1. Safe and Reliable
With 21 kinds of safe protection•Low failure rate
2. Comfort
Ultra-quiet operation•more comfortable
3. Convenience
Touch control•more precise
4. Environmental protection
Eenrgy saving and environmental protection•Follow the trend
5. After sale
7*24 after-sales service,worry free
TECHNICAL DATA OF GAS WALL HANGING BOILER
MODEL | LLGBQ32-JK |
SPECIFICATIONS | Q32-JK |
RATED INPUT POWER(KW) | 32KW |
RATED OUTPUT POWER(KW) | 34.5kw |
THERMAL EFFICIENCY(%) | ≥108% |
RATED VOLTAGE FREQUENCY(V/Hz/W) | 220/50/120 |
GAS TYPE | NG/LPG |
GAS PRESSURE(Pa) | 2000/2800 |
TEMP.RANGE OF HEATING WATER(℃) | DHW:30-60℃ HEATING HOT WATER:30-80℃ |
△T=25℃ HOT WATER SUPPLY(KG/MIN) | 13.6L |
APPLICATIVE WATER PRESSURE(MPA) | 0.05-0.6 |
DIMENSION(HIGH*WIDE*THICK) | 740*460*325 |
WEIGHT(KG) | 45 |
DIAMETER OF SMOKE PIPEφ(COAXIAL) | φ60/100 |
PRODUCT DISPLAY
Simple working principle(The premise is electricity on, gas on,
water on.)
When the water flow sensor senses the water flow, a signal is
transmitted to our main board, which gives instructions for the fan
to turn. The air produced by the rotation of the fan flows back to
the air pressure switch, and the signal is transmitted to the main
board, which gives instructions for the ignition needle and
solenoid valve to start heating, and the gas is burned to produce
exhaust gas. The exhaust gas produced by is discharged through the
fan. The resulting hot water flows out of the heat exchanger.
Working principle of gas wall hanging furnace
The working principle of gas wall hanging furnace is that natural
gas is burned in the wall hanging furnace, the hot water in the
wall hanging
furnace is heated to a certain temperature, and the water in the
wall hanging furnace is transported to the heating equipment. At
the same time,the wall hanging furnace can also heat domestic hot
water when using natural gas combustion. It can be used for heating
and bathing.
The system connection and water injection connection are performed
in the following steps
1, loosen the pump automatic exhaust valve and the system body
heating water distributor or radiator exhaust valve.
2. Open the water refill valve and system water supply valve of gas
heating hot water furnace and close the water outlet valve of
sanitary hot water.
3. When the pressure of the heating system reaches 0.1MPa (the
pressure gauge shows 1.0bar), close the water refill valve of the
gas heating hot water furnace.
4, In order to discharge the air in the pump as soon as possible,
you can start the circulating water pump repeatedly. There is air
in the system , which will cause noise and affect the normal
operation of the system. Close the exhaust valve of the water
system when it has discharged water.
Function of temperature sensor: The temperature sensor of gas wall
hanging boiler is divided into heating senses and hot water
temperature sensor, it senses the running temperature of hot water
and heating, and can obtain very accurate temperature, so that the
application of wall hanging boiler is more convenient and accurate.
When the wall mounted furnace starts, after the system pressure is
normal, the water pump starts to promote the heating media water
flow, turn on the water flow switch or water flow sensor, output
water flow signal (switch signal or pulse signal) to the main
controller, the main controller receives the water flow signal,
start the fan to clean before, and detect whether various safety
devices are normal, in the case of normal safety devices, Ignition,
and then respectively open the first and second valves, gas into
the burner under the action of electric spark ignition gas
combustion (in the process of ignition, the fan is generally half
speed operation or power by inertia operation, to be burning,
according to the amount of gas to determine the fan speed. For the
use of gas proportional valve models, proportional valve ignition
current, minimum current, maximum current, and respectively can be
adjusted), through the ion flame technology to make the flame
normal combustion, heating media through the radiator to the air or
radiation out, to achieve the purpose of heating. And so on.
ABOUT US
Qingdao Hiounce hvac equipment co., Ltd., located in "brand, the
beautiful coastal city - qingdao, China, was founded in the 1950s
of the qingdao municipal restructuring state-owned enterprises -
qingdao boiler factory. it is a company dedicated to research and
development, production of high-grade wall hanging furnace,
the electric heating furnace, biomass heating boiler, kitchen
burning gas, discharge of oil absorption and the module of boiler
fuel gas high-tech enterprises.
Qingdao Hiounce hvac equipment co., Ltd.have more than 100
employees.Company headquarters has total handling, personnel
department, finance department, marketing department, the ministry
of commerce, office (provincial), purchasing, and import and export
department, technology department, engineering department,
after-sales service department, and other functions of the eleven
departments, through the perfect sales and service network,
security, stability, energy saving, environmental protection
products supply users.