Glass Panel Gas Burner Stoves Kitchen Appliance Built In Gas Range

Gas Stove Glass Panel Kitchen Appliance Gas Hob Electric Stove Gas Cooke
 
GAS STOVE INSTRUCTIONS
 
1. Safe and Reliable
With 21 kinds of safe protection•Low failure rate
 
2. Comfort
Ultra-quiet operation•more comfortable
 
3. Convenience
Touch control•more precise
 
4. Environmental protection
Eenrgy saving and environmental protection•Follow the trend
 
5. After sale
7*24 after-sales service,worry free
 
 
TECHNICAL DATA OF GAS STOVE

 
 
PRODUCT DISPLAY

 
the gas stove can not fire how to do
1. When the gas stove fails to fire, you need to find the problem first. First check whether there is gas, if not, it needs to be added in time.
2. If it is a pulse type, it may be that the battery has no power. You only need to open the tank box at the bottom of the gas stove and replace the new battery.
3, if the above are dealt with, but still can not fire, there may be poor line contact. The gas range can be lifted, rust removed, and the wiring reconnected. And the ignition needle should be aligned with the air outlet of the fire cover, the internal rusty place, dredge with a toothpick.
4, if it still can't be solved, there may be a problem with the ignition needle, need to replace a new ignition needle, and try again.
 

The reasons for flameout after the gas stove is burned are as follows: 1,Not enough gas.Specific solution: pay the gas fee immediately (wait about half an hour), or supplement the gas..
2, flameout protection induction needle failure; Specific solution: In this case, it must be repaired. Please call the service phone of your gas cooker. If it is within the 1-year warranty period, it should be free.
 
 
3. The damper is too large or too small; Specific solution: adjust the damper. First of all, we need to adjust the small damper to increase the concentration of gas. Then, adjust the damper to the blue flame after ignition, but the bottom of the flame can not leave the stoma, otherwise there will be extinguished.
 
 
4. The fire cover is not placed in the correct position; Solution: Reinstall the fire cover and pay attention to the precautions mentioned above. 5. The distance between the metal rod at the top of the spark porcelain column and the stove is abnormal. Of course, this situation is relatively few, that is, the distance between the metal rod at the top of the spark porcelain column and the stove, need to be just right. If the distance is large, there will be no spark phenomenon; If the distance is close, there will be abnormal spark, the general distance is about 1cm is the best.


 
 
ABOUT US
Qingdao Hiounce hvac equipment co., Ltd., located in "brand, the beautiful coastal city - qingdao, China, was founded in the 1950s of the qingdao municipal restructuring state-owned enterprises - qingdao boiler factory. it is a company dedicated to research and development, production of high-grade hanging wall hanging furnace, the electric heating furnace, biomass cainuanlu, kitchen burning gas, discharge of oil absorption and the module of boiler fuel gas high-tech enterprises.
Qingdao Hiounce hvac equipment co., Ltd.have more than 100 employees.Company headquarters has total handling, personnel department, finance department, marketing department, the ministry of commerce, office (provincial), purchasing, and import and export department, technology department, engineering department, after-sales service department, and other functions of the eleven departments, through the perfect sales and service network, security, stability, energy saving, environmental protection products supply users.