Wuxi Yujia Industry & Trading Co.,Ltd |
|
LJT-2D paper tube winder, Good quality paper tube machine, OEM paper tube machine
Supply ring machine LJT-2D ring dragon machine specializing in the
production of large paper tube
1 LJT-2D paper tube winder parameters
1.1 Final Products (Processed according to customer requirements)
1.2 Quantitative 100 – 600 GSM (made of Class B, Class A, Class 3A)
1.3 Raw materials Gray cardboard, kraft paper, white glue
1.4 Winding Machine Technical Parameters
Inner diameter of production tube Ø 200 mm – Ø 610 mm
Production paper tube thickness 2 – 30mm
Paper tube production speed 1 - 15 m/min (depending on paper tube
thickness and paper quality, speed varies)
Paper tube cut length 1,000 mm – 4,000 mm
1.5 main functions
The use of infrared to control the length of the cut, the length
setting is convenient and accurate.
Suspended operation panel for easy operation.
The tension control of the paper strip is made by the air pressure
system. The tightness of the cylinder can be adjusted by pressing
the paper strip.
The left and right sides of the mainframe are lined with a paper
supply and glue supply system (like the two wings of an aircraft)
Paper tray double station design. (Design of storage position)
makes the splicing process easier to operate. Prevents the main
machine from slowing down due to the splicing process and reduces
the quality of the paper tube. (Variations of speed can cause
changes in key factors such as the amount of squeegee used, the
tension in the tape, and other factors affecting the quality of the
paper tube)
Each tape guide wheel can be adjusted laterally. Paper tape angle
fine-tuning is more convenient.
Integral paper tray holder. Increase the adjustment efficiency of
the tape angle to adjust the angle in place at one time.
And can save the production of online disk space.
The sizing for 50 sheets includes a plastic box and a pneumatic
tension control, which can be based on the strength of the paper
tube by using double-sided sizing or single-sided gluing.
Mechanical paper increase efficiency, reduce production personnel
to reduce production costs.
Flange shafts are retractable. With tapered mandrels, the inside
diameter of the paper tube can be fine-tuned.
Transmission system with gear shift design. To adapt to different
requirements of the production of paper tubes.
The paper tube is cut with a saw blade.
1.6 Configuration Scope of Supply
Host power 30KW
1 paper core rod (according to customer requirements)
Coil belt 2 (according to customer requirements)
Belt tensioner Handwheel drive
Sliding paper roll rack 50 layers of paper, with a crane attached
to the paper frame, easy to roll the paper roll
Delivery of white plastic pneumatic diaphragm pump conveying white
plastic
Send rubber pipe to adapt to 50 layers of paper (including white
glue return collection bucket)
Paper strip gluing device It is used to glue 50 sheets of paper
with plastic box and pneumatic tension control, and double-sided
gluing or single-side glue is adopted according to the strength of
paper tube.
Paper tension adjustment 50 strip tension controller, controlled by
pneumatic system
A set of glue on the surface paper (roller type glue, reserve the
position of the print device)
Wax device on the bottom paper (for lubrication paper)
Saw blade cutting motor 4KW
Paper tube length control Infrared control device set
Hanging operation box
Stand-alone electrical box
1.7 Material and description of the main parts of the tube rolling
machine
Abrasives are made of carbon steel, hardened and plated.
The reel belt is made of a durable canvas belt.
Each roller material is made of seamless steel pipe and hardened.
The important structure is made of cast iron castings with stable
structure and good vibration absorption performance.
Reduce mechanical vibrations.
1.8 Supply Spare Parts and Special Tools
Saw blade 2 PCS
Relay 1 PCS
Proximity switch 2 PCS
Selector switch 2 PCS
1.9 Remarks: The videos are similar models and are for reference
only.