CE Two Head Paper Tube Making Machine , Cutting Length 1 - 5m

Quality-Assured New 2 Machine Head Numerical Control Paper Tube Machine

Use attention points

1, Before using the equipment, check the situation, electrical equipment, electrical switch is good, whether the line insulation, screw, nut fastening, protective device is safe, and the refueling point of lubricating oil, empty running 1 - 2 minutes before the normal operation of equipment.
2, The equipment must be responsible for the use of other people. Each part of the machine work, the work of non swing card, gauges and other debris, the operating personnel are not allowed to leave the job.
3, When cutting down, such as the use of ventilation machine cutting paper, paper pipe cutting machine height can not exceed 125 millimeters, and according to the size requirements, with the pressure iron fixation. Machine tool can only cut paper and not cut other boards. Two or more operations should cooperate with each other. When working, it is not allowed to extend the hand into the press iron and blade to prevent cutting injury. If a special paper cutting machine is used, it is not allowed to extend the hand into the rotating core shaft to prevent the pressure injury.
4, Grinding, to prevent the paper involved in the trousers; adjust the machine, note the hand grinding abrasive wheel.

Use:

This equipment can produce all kinds of parallel paper tubes, such as printing and dyeing, cloth tube, tape, airflow spinning, food packing tube and so on.

1. Wear the personal protective equipment properly. What should be worn must be worn, and what should not be worn must not be worn. For example, when the paper tube is machined, the female worker is required to wear a protective cap. If not, the hair may be stranded in. At the same time, gloves must not be worn. If worn, the rotating part of the paper tube machine may wring the gloves in and hurt the hands.

2. The paper tube machinery and equipment should also be inspected according to the regulations. Especially

Paper tube machine

Paper tube machine (4)

It is to fasten the object to see if it is loose due to vibration in order to re-fasten.

3, before the operation of paper tube mechanical equipment for safety inspection, and empty car running, confirm normal, can be put into operation.

4, equipment is strictly prohibited from running with faults, and must not be used together to prevent accidents.

5. When paper machine is in operation, it is strictly prohibited to adjust by hand, nor can parts be measured by hand or lubricated or cleaned up. If necessary, mechanical equipment should first be shut down.

6. The tools, fixture and parts used for paper tube mechanical equipment must be firmly fastened and not loose.

7, mechanical safety devices must be properly used according to regulations, and must not be removed or used.

8. When the paper machine is running, the operator must not leave the work place to prevent any problems from occurring.

9, after the end of the work, the switch should be closed, the cutting tools and the work pieces are withdrawn from the working position, and the work site is cleaned up, the parts, the jig and so on are arranged in order, and the hygiene of the mechanical equipment of the paper tube is cleaned.