Simple To Handle Qz Model Double Girder Grab Bucket 10t Overhead
As one of the overhead crane families,QZ model double girder grab
bridge crane is widely used in loading goods in port, factory,
workshop and power plant.The work classification is heavy. The
working duty is A6.The lifting capacity includes the weight of the
It is widely used in power plants, ore, limestone, coke, coal,
sand, slag, loose clay and other granular material warehouse.
The special requirement should be mentioned when grab underwater
material or some special material. When using outside, there is
water proof equipment along with the grab.
The grab bucket can open and close at any height.
|Liting Capacity (T)||5T||10T||16T||20T|
|Max.Lifting Height (M)||20m||18m||22m||26m|
|Working System||A6|| || || |
| || ||Travelling||44.6||45.7||43.2||43.2|
| ||Bridge travelling||93.7-114.4||112.5-101||98-87.3||87.3|
| || ||Outdoor||20.7-42.1||27.4-51.2||48.5-69||57.3-76.8|
| ||Dead weight (KG)||2632-2546||4800-4793||7841-8305||9812-10123|
|Rail recommended||43kg/m, QU70|
3Phase AC 380V 50HZ (As your demand)
♦ This product has two operational methods, ground(pendent
controller /remote controller) or operational cabin room .
Safety Devices for Grab Overhead Crane:
To guarantee the normal operation of crane and avoid the personal
casualty and mechanical damage, the safety device we provide are
not only the electric protective devices or alarm bell but also
other equipments as following:
1.Overload Limit Switch
2. Rubber Buffers 3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring 8.Lifting Height Limit Device
♦ This product is widely in loading goods in port, factory, workshop
and power plant.It is prohibited to use the equipment in the combustible, explosive
or corrosive environment(Need explosion proof type for this).
DELIVERY & PACKING
Q1. Can the cranes be customized?
Yes,every customer’s working condition is different, all of our
products can be customized depend on customers’ requirements.
Please give us the information as clear as you can, so we can give
our best design to suit for your demands.
Q2. How many operation methods for my selections?
We provide pendent controller with push button control type, remote
control type or cabin control type.Please tell us what kind of
operation way you need.
Q3. I have low headroom in my workshop, is it possible to install a
crane in it?
We have special products for low headroom workshop, our engineer
can give the best design according to your dimensions.
Q4. Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook,
electromagnetic, grab bucket etc...
Q5: In order to offer the most suitable design solution for you, it
will be great helpful if you can offer us the following information
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the
rails? How long is it? 5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the
drawing photo of your workshop.