Double Axles 20x6 Flatbed Tandem Car Carrier Trailer , Car
Features and standards:
1. Floor: 2.5mm chequer plate steel floor.
2. Tire: 165/70 R 14 with DOT&E-mark certification (white
3. Leaf spring: 5 leaf spring.
4. double axles (with brake)
5. Loading capacity:1500kg-2500kg
6. Surface finish: hot dipped galvanized or powder coated
Flatbed trailer, also known as: trailers, flatbed, trailer,
trailer, semi-trailer, trailer, logistics vehicles, truck, tractor,
truck, pallet truck, heavy steel flatbed trailer! Flatbed trailers,
chassis, lifting device lifts the traction device, hydraulic
system, electric control system, the body and the toolbox, lifting,
pull and lifted traction and many other features.
Rolled C/Plate Body & Floor
Winch Post ONLY
Sides 230mm high Allowing for car doors to open
Mudflaps and all electrical complying with Australian standards
New wheels (NOTE: NOT SECOND HAND)
230mm High Sides 2.1mm Rolled Checker Plate Tub
2.1mm Checker Plate, 250mm Wide 4 Fold
75X50 AND 50X50 RHS
50x25x2.5mm (extra reinforced)
100x50x3mm RHS Welded Back to Front Springs hangers, spare wheel
holder and Plug Holder with 2 Off 8mm Rated chain 450mm Long
Axles Heavy Duty 45mm Square Solid
50mm Mechanical over Ride Plunger Type / Hand Brake
Mechanical Disc/Galvanised Calliper’s True Cable Hand Brake
Hub Ford SL B-type PCD 114.3, 5 x 1/2" Studs (Stud Centre 66.6mm)
Bearing B-type Inner Large L68149 / B-type outer Small LM12749
NEW Sunraysia Type 14x5.5" CB 84mm PCD 114.3 (FORD)
LED Multi volt 12-24
Lights LED, ADR approved lights (Protected) front and side
Comes with 7 pin round plug
TRAILER PRICES INCLUDE GST
LOAD RATING KG
Flatbed trailer performance
1. Double reed buffer traction mechanism in the vehicle starting or
sudden braking a buffer to avoid damage to the goods.
2. Traction cage off the upper and lower adjustable fixed, simply
adjust to different tonnage the traction head or forklift traction
3. The suspension frame, compared with the traditional hard-wired
(soldered) to reduce the body long-term stress damage, longer life.
4. Axles automatically swing adjustable punch the ground to ensure
the board level and tire force balanced.
5. The front and rear set of optional spring steel shock absorbers
to reduce the bumps of goods damage
6. 180 degree rotation stand, the minimum turning radius (180
degrees turning on the spot)