Active Member
|
[China]
Address: Handan Yongnian
Contact name:
Handan city Yongnian District Maide Fasteners Co. Ltd |
|
|
Yellow Color Steel Custom Flat Metal Washers With M3 - M52 Size High Strength
Product Description
Flat washers are mainly used to reduce the pressure. When some parts are tightened with large axial forces, the washers are easily pressed into a dish shape. In this case, the material can be changed and the hardness can be improved.
The locking effect of the spring washer is general, and the
important parts are used as little or as little as possible, and
the self-locking structure is adopted. For spring washers used for high-speed tightening (pneumatic or
electric), it is best to use surface-phosphorized washers to
increase their antifriction performance, otherwise they may easily
generate frictional heat, burn out or open the mouth, and even
damage the surface of the connected parts. Spring washer structures should not be used for thin plate
connections. According to statistics, spring washers are used less and less in
cars.
The tooth shape of the connection in the toothed elastic washers is
used in the automotive industry due to the large and uniform
locking force, while the spacing toothing is less.
For spring washers and spring washers, according to the national
standard, 60, 70 and 65 Mn steels in GB699-1999 Quality Carbon
Structural Steel can generally be selected.
Flat pad standard
National standards are different.
Here is the United States flat pad standard:
| Specification | Minor Diameter | Outside Diameter | Thickness Tolerance | Thickness Tolerance Disintegration |
| USS 3/16 | 6.22～6.73 | 14.15～14.66 | 0.91～1.65 | 0.91～1.40 |
| 1.40～1.65 | ||||
| USS 1/4 | 7.80～8.31 | 18.47～19.02 | 1.30～2.03 | 1.30～1.65 |
| 1.65～2.03 | ||||
| USS 5/16 | 9.40～9.91 | 22.05～22.99 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 3/8 | 11.00～11.51 | 25.22～26.16 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 7/16 | 12.57～13.08 | 31.57～32.51 | 1.63～2.64 | 1.63～2.20 |
| 2.20～2.64 | ||||
| USS 1/2 | 14.15～14.60 | 34.75～35.69 | 2.18～3.35 | 2.18～2.70 |
| 2.70～3.00 | ||||
| 3.00～3.35 | ||||
| USS 9/16 | 15.75～16.26 | 37.13～38.07 | 2.18～3.35 | 2.18～2.70 |
| 2.70～3.00 | ||||
| 3.00～3.35 | ||||
| USS 5/8 | 17.30～18.24 | 44.27～45.21 | 2.74～4.06 | 2.74～3.20 |
| 3.20～3.60 | ||||
| 3.60～4.06 | ||||
| USS 3/4 | 20.45～21.39 | 50.62～51.56 | 3.10～4.50 | 3.10～3.60 |
| 3.60～4.20 | ||||
| 4.20～4.50 | ||||
| USS 7/8 | 23.65～24.58 | 56.97～57.91 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 1 | 26.80～27.74 | 63.32～64.26 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 11/8 | 31.57～32.51 | 69.67～70.61 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 11/4 | 34.75～35.69 | 76.02～76.96 | 3.45～4.88 | 3.45～4.00 |
| 4.00～4.30 | ||||
| 4.30～4.88 | ||||
| USS 13/8 | 37.85～39.24 | 82.30～83.69 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 11/2 | 41.02～42.42 | 88.65～90.04 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 15/8 | 44.20～45.59 | 95.00～96.39 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 13/4 | 47.37～48.77 | 101.35～102.74 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 17/8 | 50.55～51.04 | 107.70～109.09 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 | ||||
| USS 2 | 53.72～55.12 | 114.05～115.44 | 3.89～5.41 | 3.89～4.40 |
| 4.40～5.00 | ||||
| 5.00～5.41 |
The Role of Flat Mat
1. Increase the contact area between the screw and the machine.
2. Eliminate damage to the surface of the machine when the spring
pad is unloaded. When used, it must be a spring pad and a flat pad.
The flat pad is facing the surface of the machine. The spring pad
is between the flat pad and the nut.
