|
[China]
Trade Verify
Address: Rm5-616,No.851,Dianshanhu avenue, Qingpu area，Shanghai city，CHINA
Contact name:Wang
SHANGHAI FAMOUS TRADE CO.,LTD |
|
Verified Suppliers
|
|
|
Sapphire glass is an application of synthetic sapphire generally produced by subjecting aluminum oxide powder under extreme heat and pressure. Further heat treatment removes internal stresses before processing into thin sheets. The resulting output is a transparent material that is more durable than standard glass. Take note that a synthetic sapphire has the same physical properties as naturally-occurring sapphire.
Accu-Glass Products' Sapphire vacuum viewport flanges are rated for both high and ultrahigh (UHV) vacuum applications.
The use of high purity sapphire and low expansion alloys allow these viewports to be repeatedly baked out at temperatures up to 350°C. Sapphire in these viewports is a synthetic, hexagonal single crystal anisotropic material which displays substantially different physical, thermal, dielectric and optical qualities when measured along different axes. Crystal orientation of Accu-Glass Products' viewports is normal to the optical axis or 90° orientation.
UV grade sapphire has a transmission range of 0.250µm to 4.50µm while regular sapphire has a transmission range of 0.30µm to 4.00µm. Poor surface finish can contribute as much as 10% to overall transmission losses. All viewports are supplied with flat faces which have been finished to a 50-20 scratch-DIG. Thermal gradients should not exceed 20°C per minute.
HOW DOES IT WORK?
Glass sapphire windows allow the window to be mounted as close to the chamber as reasonably possible and allow the clearest access from the window surface on the air side. These windows are silver-brazed to Kovar® sleeves. They are mounted in stainless steel tube-weld adapters and CF type flanges for use below 1x10-11, or ISO type Kwik-Flange®. Optional flange weldments are available as special order.
Sapphire Window surfaces which are extremely hard and scratch resistant offer a minimum of distortion and provide maximum light transmission suitable for most applications. UV grade viewports have a 90° crystal orientation normal to the optical axis.
Features:
We can offer "Sapphire Viewports" available in series of standard sizes from 3/4 inch through 2 inch with a variety of flange options. Dimensions are in inches unless otherwise noted.
CAUTION: Although sapphire has a reasonable thermal conductivity, for safety, we strongly recommend that no viewport is exposed to a temperature ramp of greater than 2-3°C per minute, and that no viewport be exposed to direct thermal radiation. To limit thermal gradients when heating viewports, we recommend the viewing area and the flange be covered with many layers of aluminum foil to act as a reflective shield.
ZMSH is the premier sapphire lens manufacturer in China. Our optical lens components are manufactured by JINGJING Tech to the exact specifications needed for your application. Sapphire is an extremely durable and scratch resistant substrate which creates a rugged optical lens that can stand up to very harsh environments. Sapphire lenses will add to the long lasting value of your project or product. Perhaps you are constantly replacing your product’s glass lenses due to damage. Consider replacing them with sapphire from us.
| Material | Sapphire | ||
| Diameter | 0.5 to 350mm | ||
| Diameter Tolerance | ±0.05 mm (Standard), up to +0.000/-0.002 mm | ||
| Thickness tolerance | ±0.05 mm (Standard), up to +/-0.0.1mm | ||
| Surface Quality | 60-40 S/D (Standard), up to 10-5S/D | ||
| Surface Figure | λ/4 or λ/10 | ||
| Centration | 1 Minute or 30 Second | ||
| Coating | uncoated, AR and HR | ||
