Active Member
|
[China]
Contact name:Dennis
Hebei Mingmai Technology Co.,Ltd |
|
|
315mm Workshop Low Starting Pressure Saddle Welder Saddle Fusion Machine
Workshop Fitting Fusion Machine Introduction:
1.The machine is used to weld pipes made from PE,PP,PVDF and can
not be used to weld material without description otherwise the
machine may be damaged or some accident may be resulted in.
2.Don't use the machine in a place with potential hazard of
explosion.
Workshop Fitting Fusion Machine Specification:
| Model | SWT-MA315 |
| Pipe sizes(mm) | 90,110,125,140,160,180, |
| 200,225,250,280&315mm | |
| Heating plate max.temp. | 270°C |
| Temp.deviation in surface(170-270°C) | <±5°C |
| Pressure adjustable ranges | 0-6Mpa |
| Working voltage | 380V,50HZ |
| Heating plate power | 5KW |
| Hydraulic unit power | 1.5KW |
| Planing tool power | 0.75KW |
| Total power | 7.25KW |
Component:
1. Milling Cutter
2. Spacial Clamps Fitting
3. Heating Plate
4. Console Desk
Package & Delivery:
Advantages:
| 1. Workshop fitting welding machine with printing is suitable for fabricating elbow, tee, cross and wye shape (45 and 60) Fittings of PE, PP, PVDF in workshop |
| 2. Base on the integrated design, if welded different fitting you just need to replace the corresponding fixture |
| 3. Heating plate uses independent temperature control svstem. removable PTFE coated. |
| 4. Electric facer with safety limit switch can avoid the milling cutter accidental starting5. Low starting pressure ensures reliable welding quality of small pipes. |
Service:
Standard:Approved by ISO9001, CE,SGS,ROSH,EMC standard
Machine Quality Guarantee : 24 months.--- If any parts broken or does not work under normal operating, we are free to provide.
Products:
