LDPE 0.07MM thickness Hot melt adhesive film patch heat embroidery
backing
1. Hot-melt embroidery linings
Hot-melt embroidery linings often remind people of nylon films, but
usually they are not nylon. The beauty of hot-melt linings is that
you don’t need to wet your product when you remove the lining.
Naturally, this is the choice when your product cannot be wet. It
is very convenient and quick to use hot-melt surface lining, so
when your fabric can withstand the high temperature of a hot iron,
you may prefer to use hot-melt surface lining.
2.Tips for hot melt surface lining:
- If you are not sure whether your fabric can withstand the
temperature of the iron: take a small sample cloth, and try it with
a piece of paper.
- If you use low-quality hot melt interlining, it will leave stains
and unpleasant odors on the fabric. So pay attention to buying good
quality products.
- Never use a steam iron to iron the hot melt surface lining
- Usually, it is better to lay a piece of paper on top of the
embroidery, and then remove the hot melt lining by ironing the
paper.Hot-melt interlining: If one of the following conditions
exists, a hot-melt interlining should be used, which can be removed
from the embroidery product with a hot iron.
- Your fabric and pattern need embroidery linings to keep the
stitches even, but you cannot tear or cut embroidery linings by
hand (the pattern and/or fabric may be too easily deformed by hand
tearing, and/or use cutting linings. Too thin).
- Your product cannot be washed with water, the lining is too easy to
deform by hand tearing, and/or the cutting lining is too thin.
- You are using some specialized techniques, such as making
lace on the edges, and the water-soluble lining does not have
sufficient stability.
- You want to create an independent embroidery from a design that is
not an independent pattern (you can embroider the pattern on the
fusible embroidery lining, cut off the extra part, and then iron
the corners).
| Item Name | Nonwoven Fabric | Material | 100% LDPE | Width | 58/60" | Color | Transparent | Thickness | 0.07mm | Application | Suitable for garment | Washing Conditions | Both washing and dry cleaning are all acceptable | | 1) temperature:125℃-135℃ 2) pressure: 2-3.5 bar 3) time: 10-14 s | Product Features | Pure color in the surface , no impurities, easy to tear This series
has a delicate and different handfeel Good resistance and dimension stability after washing Eco-friendly products , get OEKO-TEX standard 100 certificate |
|
| |
| |
| |