Manual Battery Master Disconnect Switch for Marine Battery and
Vehicle.
The switch protects vehicles from both battery drain and theft as
well as allowing service personnel to lock-out tag-out. It also
serves as an effective emergency power cutoff
Description
• Tin-plated copper studs for maximum conductivity and corrosion
resistance
• Studs accept 3/8" (M10) ring terminals
• 7/8" (22 mm) stud length accepts multiple cable terminals
• one-piece terminal stud design never loosens over time
• One-piece stainless flange nuts ensure safe and secure
connections
• Isolating cover protects rear contacts
• Breakout tabs allow wire access in any direction
• 6 Circuit label set included
Gallery Manual Battery Master Disconnect Switch for Marine Battery and
Vehicle
Warmly Reminder:
The positive and negative conductors should not be attached to the
same battery switch.
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Company warehouse
Manual Battery Master Disconnect Switch are designed for the most demanding environments in all
vehicle applications.
Our Battery Switch Power Master Disconnect Isolator is used for
Cars, Vehicles, RV, Marine Boats, and ATVs, etc. It can be used as
a stand-alone device or connected to other switches. In the ON/OFF
state, the switch knob cannot be moved. The switch state can be
changed by 45 degrees counterclockwise. The movable 4 side tab and
rear cover can be used to avoid connecting terminals. The switch
can be mounted on the surface or behind it. The battery switch can
disconnect the battery safely to eliminate any power draw from the
battery when the vehicle or boat is not in use.