Zhengzhou Jansincere Refractory Co., Ltd |
|
Super Quality Good Erosion Resistance Ceramic Fiber Board for Furnace
Introduction:
Ceramic fibre board adopts ceramic fibre which is in corresponding temperature levelas raw material, shaped by the large automatic vacuum filter.
Application:
Refractory lining for industrial furnace in wall, roofs, stacks and doors.etc
Combustion chamber liners ,boilers and heaters
Back-up insulation for brick and monolithic refractory
Transfer of molten aluminum and other non-ferrous E metals
Barrier against flame and heat
Hot face layer for high velocity or abrasive furnace atmosphere
Technical Index:
Item | Ceramic Fiber Board |
Al2O3 % | 39-40 |
Al2O3+SiO2 % | 99 |
ZrO2 % | 12 |
Density g/cm3 | 0.28 |
Linear change on reheating % | ≤4 (1400℃*24h) |
Thermal conductivity W/m.k | 0.085(400℃) |
Modulus of rupture Mpa | 0.5 |
FAQ:
1. When Jansincere Company established?
In 1986.
2. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
3. What’s your MOQ?
Normally we don’t have particular requirements on the MOQ. But we will charge the mold cost when the quantity of per shape is small.