Active Member
|
[China]
Address: Room 1512, Building A-K3, Jindi Liberty, Tuanjie Avenue, Wuhan, China
Contact name:Zenger
Hubei Suny Automobile And Machinery Co., Ltd |
|
|
Beiben Off Road 4x4 Vacuum Tank Truck Sewage Suction Tanker Truck
Description:
Sewage tanker truck is the new sanitation vehicle that can collect, transit, clean up and transport sludge & sewage therefore can avoid the secondary pollution. It has high capacity and convenience for transportation. Sewage tanker truck is applicable to collect and transport liquid material such as feces, mud and crude oil etc.
Applications:
Rinsing underground sewage pipes, the collection and transportation of sludge and city life waste and building operations such as muddy water in liquid waste and other functions.
Competitive Advantage:
1. Equipped with special vacuum pump, power take off, transmission shaft, high pressure sewage tank, pipe network, sewage pipe for observing and cleanout equipment. Time for full suction < 5min
2. The Sewage Suction Trucks, special section, taking the force transmission device by rotary vane pumps, vacuum pump, ( with domestic leading technology big suction ) oil and gas separation device, hydrosphere separator, vacuum pressure gauge, pressure vessel, pipe system composition, and equipped with hand-washing facilities and visual dung tube.
3. The tanks bulbar and the horizontal sextant angle are greater than the material rest angle, ensuring the discharging speed.
4. The diesel engine ( air compressor unit ), providing compressed air.
Specifications:
Chassis | ND2161E48J | |
Cubage | 7000 Liters to 10,000 Liters | |
Vehicle | Overall dimension (length/width/height) ( mm ) | 8826×2500×3355 |
G V W ( kg ) | 16000 | |
Payload ( kg ) | 7960 | |
Curb mass ( kg ) | 7910 | |
Fuel Type | Diesel | |
Fuel consumption ( L/100km ) | 22 | |
Top speed ( km/hr ) | 90 | |
Engine | Model | WP10.270 |
Exhaust/Power ( kw ) | 9726cc/199 | |
270 HP | ||
Type | 6-in-line water cool Turbo Charge engine | |
Chassis | Drive type | 4×4 |
Wheelbase ( mm ) | 4,800 | |
Tread ( mm ) | 1995/1800. | |
Front Bridge | 7.5T FRONT AXLE | |
Number of spring axles | 9/9+6 | |
Tire specification | 12.00-20 ; 12.00R20 | |
Air condition | with | |
Suction system | Suction pump | Single Stage Rotary Oil Seal Vacuum Pump |
Special parameter | Vertical suction height | ≥8 |
working pressure | 8500 Pa | |
rotation speed | 500 | |
suction speed | 98 L/S | |
power | 5.5 kw | |
inlet diameter | 50 mm | |
filling time | Less than 5 s | |
discharge time | Less than 4 s | |
Equipped with | The vacuum sewage suction truck is equipped with : 1.chassis truck 2.Vacuum tank( Back cover can be opened ) 3.power take off 4.transmission shaft 5.vacuum pump (rating rotate speed=1400 r/m,min rotate speed>800 r/m, max suction lift>6 m, vacuum>500 mmHg) 6.Pipe for sucking and discharging sewage( Time for full suction<5 min ) 7.fecal pipe for observing and cleanout equipment | |
