Active Member
|
[China]
Address: 8/f, Building D,Fukang Industrial Zone,Longhua District,ShenZhen
Contact name:Alice Cai
Shenzhen Fibery Photoelectron Technology Ltd., |
|
|
4 Port Media Converter 1 Fiber+4 Rj45 Port 1310/1550Nm Fast Media Converter
Description
The series is Ethernet media converter that converts the copper UTP
media to the multimode or single mode fiber with duplex SC, ST, and
LC interface. The equipped auto-negotiation function enables the
media converters to operate at 10 or 100Mbps copper Ethernet or
Fast Ethernet and the 100Mbps fiber. This conversion complies with
IEEE802.3 and IEEE802.3u standards with two different network
connection media, 10/100Base-TX and 100Base-FX. The data transmission is realized by switching and
store-and-forward technologies.
Link fault pass through capability is built inside the media
converters. LEDs on the front panel therefore display the media
converter status and the far end fault conditions for network
diagnosis purpose.
This series of media converter can be used as a stand-alone device
or be directly mounted into 2U 19”rack mount chassis.
Fourteen/Sixteen media converter slots can be accommodated in this
chassis.
Technical Parameters
| Technical Parameters for 10/100M Adaptive Fast Ethernet Optical Media Converter | ||||||||||
| Number of Network Ports | 4 channel | |||||||||
| Number of Optical Ports | 1 channel |  | ||||||||
| NIC Transmission Rate | 10/100 Mbit/s | |||||||||
| NIC Transmission Mode | 10/100M adaptive with support for automatic inversion of MDI/MDIX | |||||||||
| Optical Port Transmission Rate | 100Mbit/s | |||||||||
| Operating Voltage | AC 220V or DC +5V | |||||||||
| Overall Power | <1W | |||||||||
| Network Ports | RJ45 port | |||||||||
| Optical Specifications | Optical Port: SCMulti-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um, 8/125,10/125um | |||||||||
| Data Channel | IEEE802.3x and collision base backpressure supportedWorking Mode: Full/half duplex supported Transmission Rate: 100Mbit/swith error rate of zero | |||||||||
| Desk Type Dual-Optical Single-Mode/Multi-Mode Media Converter | ||||||||||
| P/N | Wavelength (nm) | Optical Port | Electric Port | Optical Power (dBm) | Receiving Sensitivity (dBm) | Transmission Range (km) | ||||
| 1 | 850 | SC | RJ-45 | -8~ -3 | ≤-19 | 0.55 | ||||
| 2 | 1,310 | SC | RJ-45 | -20~ -15 | ≤-34 | 2 | ||||
| 3 | 1,550 | SC | RJ-45 | -15~ -8 | ≤-34 | 10 | ||||
| 4 | 1,310 | SC | RJ-45 | -15~ -3 | ≤-34 | 20 | ||||
| 5 | 1,310 | SC | RJ-45 | -8~ -3 | ≤-34 | 40 | ||||
| 6 | 1,310 | SC | RJ-45 | -5~0 | ≤-34 | 60 | ||||
| 7 | 1,550 | SC | RJ-45 | -5~0 | ≤-34 | 80 | ||||
| 8 | 1,550 | SC | RJ-45 | -3~3 | ≤-36 | 100 | ||||
| 9 | 1,550 | SC | RJ-45 | 0~5 | ≤-36 | 120 | ||||
Feature
1. Complies with IEEE 802.3 10 Base-T standard.
2. Complies with IEEE 802.3u 10/100 Base-TX/FX standard
3. Complies with IEEE 802.3X standard.
4. 10/100Mbps port with full/half duplex auto-negotiation
5. Back pressure flow control for full duplex
6. Converter mode with auto-change-forward(Switch)function
7. Back pressure flow control for full/half duplex IEEE802.3X.
8. Automatic identification of MDI/MDI-X cross-line.
9. High-performance 155Mbps bandwidth.
10. Complies with FCC, 15 CLASS A ,Rosh and CE MARK
Specificaion
| Rate: self-adaptive 10/100M | Optic wavelength: 850nm, 1310nm, 1550nm |
| Protocol supported: IEEE802.3/IEEE802.3U etc. | BER: < 1/1000000000 |
| Cable type: single fiber | MTBF: 3 years |
| Optic mode: single / multimode | Power: 2.5W |
| Transmission mode: half / full duplex | Power supply: AC220V/0.5A, DC-48 V /0.5A, DC5V/1A |
| Ethernet interface: 4 × RJ-45 | Working temperature: 0~50°C |
| Optic interface: SC/FC/ST | Working humidity: 5%-95% |
| Storage humidity: 5%~95%(no-condensing) | Storage temperature: -40°C~70°C |
Product Pictures
Factory Image
FAQ
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping are also optional.
Q5. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
