Active Member
|
[China]
Address: Room 403 Block A,Huafeng SOHO Creative World Hangcheng Industrial Zone Qianjin 2nd Road,Xixiang Baoan Shenzhen,China
Contact name:karen
Shenzhen Xinchenger Electronic Co.,Ltd |
|
|
High Frequency PCB Board 4 Layer 1.6mm Thickness With 1OZ Copper Weight
Specification:
| Base Material: Rogers 4003C |
| Layer:4 |
| Thickness: 1.6MM |
| Copper weight:1OZ |
| Surface finish: Immersion gold |
Radio frequency (RF) and microwave PCB’s are a type of PCB designed to operate on signals in the megahertz to gigahertz frequency ranges (medium frequency to extremely high frequency). These frequency ranges are used for communication signals in everything from cellphones to military radars. The materials used to construct these PCB’s are advanced composites with very specific characteristics for dielectric constant (Er), loss tangent, and CTE (co-efficient of thermal expansion).
Parameter:
| Layer No. | 1-16 | ||||||||
| Min board thickness | 2 layer 0.2mm | ||||||||
| 4 layer 0.4mm | |||||||||
| 6 layer 0.6mm | |||||||||
| 8 layer 0.8mm | |||||||||
| 10 layer 1.0mm | |||||||||
| Max panel size | 508*610mm | ||||||||
| Board thickness tolerance | T≥0.8mm±8%,T＜0.8mm±5% | ||||||||
| Wall hole copper thickness | ＞0.025mm(1mil) | ||||||||
| Finished hole | 0.2mm-6.3mm | ||||||||
| Min line width | 4mil/4mil(0.1/0.1mm) | ||||||||
| Min bonding pad space | 0.1mm(4mil) | ||||||||
| PTH aperture tolerance | ±0.075mm(3mil) | ||||||||
| NPTH aperture tolerance | ±0.05mm(2mil) | ||||||||
| Hole site deviation | ±0.05mm(2mil) | ||||||||
| Profile tolerance | ±0.10mm(4mil) | ||||||||
| Board bend&warp | ≤0.7% | ||||||||
| Insulation resistance | ＞1012Ωnormal | ||||||||
| Through-hole resistance | ＜300Ωnormal | ||||||||
| Electric strength | ＞1.3kv/mm | ||||||||
| Current breakdown | 10A | ||||||||
| Peel strength | 1.4N/mm | ||||||||
| Soldmask regidity | ＞6H | ||||||||
| Thermal stress | 288℃20Sec | ||||||||
| Testing voltage | 50-300v | ||||||||
| Min buried blind via | 0.2mm(8mil) | ||||||||
| Outer cooper thickness | 1oz-5oz | ||||||||
| Inner cooper thickness | 1/2 oz-4oz | ||||||||
| Aspect ratio | 8:1 | ||||||||
| SMT min green oil width | 0.08mm | ||||||||
| Min green oil open window | 0.05mm | ||||||||
| Insulation layer thickness | 0.075mm-5mm | ||||||||
| Aperture | 0.2mm-0.6mm | ||||||||
