Active Member
|
[China]
Address: Room 403 Block A,Huafeng SOHO Creative World Hangcheng Industrial Zone Qianjin 2nd Road,Xixiang Baoan Shenzhen,China
Contact name:karen
Shenzhen Xinchenger Electronic Co.,Ltd |
|
|
Customize 2 layer Rogers4350 PCB board,this is black soldermask finished surface microwave Rogers PCB,we can according to your gerber file custom rogers printed circuit boards,not only have 2 layer rogers4350 board,we are also have multi-layer rogers board,with Rogers4350 PCB,Rogers4003 PCB,rogers5880 PCB,Rogers3003 PCB,Rogers3010 PCB,Rogers6010 PCB and so on
Electronic Rogers4350 circuits,most customers are customize and order rogers4350 PCB,usually they will send gerber file to us first,then tell us the quantity,board thickness,finished surface,finished copper,color for soldermask or silkscreen,then we will quote better price to them.Some Rogers will difficult,need blind&buried hole,it will need some more time to quote that
Material: High Frequency GPS Navigation Antenna Rogers4350 Board
Layer count: 2 layers
Board thickness: 2.0mm
Copper thickness: 1oz
Minimum drill size: 0.1mm
Minimum trace & gap: 0.1mm
Surface finish: immersion tin
Special technology: blind and buried via
Blind drill: edge plating
Applications: telecom radar system
Low volume Rogers PCB prototypes
We provide the most cost efficient solution for Rogers PCB prototyping to our customers. With low minimum lots, you will get more boards for the price compared to other PCB companies that charge per board. Also, Custom Rogers Circuit Boards doesn't put any restrictions for prototype boards. For example, we don't charge extra depending on the number of drill holes needed like other companies do. We are committed to straight forward pricing that you can rely on every time. We don't nickel-and-dime our PCB customers with random service fees.
our large-volume production Rogers PCB fabrication services:
We have the capabilities to provide you with medium to high-volume Rogers printed circuit board manufacturing. We have industry leading personal customer service, PCB quality, and consistent
on-time delivery percentages for all of our PCB customers. We provide both domestic and offshore production Rogers printed circuit board fabrication. Custom Rogers Circuit Board's is the best source for competitively priced domestic and offshore PCB manufacturing.
Flexibility and quality:
We can be your one source for Rogers&Taconic printed circuit board fabrication. Use us for your prototyping and then transition to our medium or high-volume PCB fabrication services without compromising quality or service. Are your Rogers boards stuck in China? With us, if needed, we have the capabilities to manufacture boards domestically in-house. Depend on us for your mission-critical printed circuit boards. We have the capabilities to provide high-volume printed circuit boards anywhere in the world.
| Property | Thickness<0.50 mm | Thickness>=0.50 mm | Units | Test Method | ||
| [0.0197 in] | [0.0197 in] | |||||
| Typical Value | Spec | Typical Value | Spec | Metric | IPC-TM-650 | |
| (English) | (or as noted) | |||||
| Peel Strength, minimum | N/mm | 2.4.8 | ||||
| A. Low profile copper foil and very low profile copper foil - all copper weights > 17mm [0.669 mil] | (lb/inch) | 2.4.8.2 | ||||
| B.Standard profile copper foil | 0.96 (5.5) | 0.70 (4.0) | 0.96 (5.5) | 0.70 (4.0) | 2.4.8.3 | |
| 1.After Thermal Stress | ||||||
| 2.At 125°C [257 F] | ||||||
| 3.After Process Solutions | 1.75 (10 ) | 0.80 (4.57) | 1.93 (11.0) | 1.05 (6.00) | ||
| 1.66 (9.5) | 0.70 (4.00) | 1.66 (9.5) | 0.70 (4.00) | |||
| 1.49 (8.5) | 0.55 (3.14) | 1.49 (8.5) | 0.80 (4.57) | |||
| Volume Resistivity, minimum | MW-cm | 2.5.17.1 | ||||
| A. C-96/35/90 | 5x1010 | 106 | -- | -- | ||
| B. After moisture resistance | -- | -- | 5x1010 | 104 | ||
| C. At elevated temperature E-24/125 | 5x1010 | 103 | 5x1010 | 103 | ||
| Surface Resistivity, minimum | MW | 2.5.17.1 | ||||
| A. C-96/35/90 | 3.5x1010 | 104 | -- | -- | ||
| B. After moisture resistance | -- | -- | 3.5x1010 | 104 | ||
| C. At elevated temperature E-24/125 | 6x1010 | 103 | 6x1010 | 103 | ||
| Moisture Absorption, maximum | 0.3 | -- | 0.1 | 0.8 | % | 2.6.2.1 |
| Dielectric Breakdown, minimum | -- | -- | 60 | 40 | kV | 2.5.6 |
| Permittivity (Dk, 50% resin content) | 4.6 | 5.4 | 4.6 | 5.4 | -- | 2.5.5.9 |
| (Laminate & Laminated Prepreg) | ||||||
| A. 1MHz | ||||||
| Loss Tangent (Df, 50% resin content) | 0.016 | 0.035 | 0.016 | 0.035 | -- | 2.5.5.9 |
| (Laminate & Laminated Prepreg) | ||||||
| A. 1MHz | ||||||
| Flexural Strength, minimum | N/mm2 | 2.4.4 | ||||
| A. Length direction | -- | -- | 500-530 | 415 | (lb/in2) | |
| -- | -- | (72,500-76,850) | -60,190 | |||
| B. Cross direction | -- | -- | 430-460 | 345 | ||
| -- | -- | (62,350-66,700) | -50,140 | |||
| Arc Resistance, minimum | 120 | 60 | 120 | 60 | s | 2.5.1 |
| Thermal Stress 10 s at 288°C [550.4F], minimum | Rating | 2.4.13.1 | ||||
| A. Unetched | Pass | Pass Visual | Pass | Pass Visual | ||
| B. Etched | Pass | Pass Visual | Pass | Pass Visual | ||
| Electric Strength, minimum | 45 | 30 | -- | -- | kV/mm | 2.5.6.2 |
| (Laminate & Laminated Prepreg) | ||||||
| Flammability, | V-0 | V-0 | V-0 | V-0 | Rating | UL94 |
| (Laminate & Laminated Prepreg) | ||||||
| Glass Transition Temperature (DSC) | 140 | 135 minimum | 140 | 135 minimum | ˚C | 2.4.25 |
| Decomposition Temperature | -- | -- | 305 | -- | ˚C | 2.4.24.6 |
| (5% wt loss) | ||||||
| Z-Axis CTE | 2.4.24 | |||||
| A. Alpha 1 | -- | -- | 55 | -- | ppm/˚C | |
| B. Alpha 2 | -- | -- | 290 | -- | ppm/˚C | |
| C. 50 to 260 Degrees C | -- | -- | 4.2 | -- | % | |
| Thermal Resistance | 2.4.24.1 | |||||
| A. T260 | -- | -- | 15 | -- | Minutes | |
| B. T288 | -- | -- | 2 | -- | Minutes | |
| CAF Resistance | -- | -- | Pass | AABUS | Pass/Fail | 2.6.25 |
