Active Member
|
[China]
Address: Room 403 Block A,Huafeng SOHO Creative World Hangcheng Industrial Zone Qianjin 2nd Road,Xixiang Baoan Shenzhen,China
Contact name:karen
Shenzhen Xinchenger Electronic Co.,Ltd |
|
|
10 Layer PCB Circuit Board For Electronics Manufacturer With 3/3 Line Width And Space Circuit Board
Quick detail:
| Origin:China | Special: FR4 Material |
| Layer:10 | Thickness:1.6mm |
| Surface: ENIG | Hole:0.5 |
Specification:
Electronic Scale PCB With 0.8mm Thickness 94V0 Electronic Board Green Soldermask White Silkscreen,
FR - 4 epoxy glass fiber cloth substrate, based on epoxy resin as binder, with electronic level glass fiber cloth as reinforcing material of substrate. Its bonding sheet and thin copper-clad r.p. panel and inner core is an important base material in production of multilayer printed circuit board,This kind of product is mainly used for double-sided PCB, dosage is very large. Epoxy glass fiber cloth substrate, the most widely used model for FR - 4, in recent years because of the electronic product installation technology and PCB technology development needs, appeared high Tg FR - 4 products.
BGA's full name Ball Grid Array (solder ball array package), which is in the bottom of the package substrate array solder ball as the circuit I / O terminals and printed circuit board (PCB) interconnection. The device using this technology is a surface mount device package.
PBG (Plastic Ball Grid Array), which uses BT resin / glass laminate as the substrate, plastic (epoxy molding compound) as the sealing material, solder ball can be divided into lead solder (63Sn37Pb, 62Sn36Pb2Ag) and lead-free solder Sn96.5Ag3Cu0.5), solder ball and package connections do not require additional use of solder.
Parameter:
| o | Item | Data |
| 1 | Layer: | 1 to 24 layers |
| 2 | Material type: | FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers |
| 3 | Board thickness: | 0.20mm to 3.4mm |
| 4 | Copper thickness: | 0.5 OZ to 4 OZ |
| 5 | Copper thickness in hole: | >25.0 um (>1mil) |
| 6 | Max. Board Size: | (580mm×1200mm) |
| 7 | Min. Drilled Hole Size: | 4mil(0.1mm) |
| 8 | Min. Line Width: | 3mil (0.075mm) |
| 9 | Min. Line Spacing: | 3mil (0.075mm) |
| 10 | Surface finishing: | HASL / HASL lead free, HAL, Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating |
| 11 | Solder Mask Color: | Green/Yellow/Black/White/Red/Blue |
| 12 | Shape tolerance: | ±0.13 |
| 13 | Hole tolerance: | PTH: ±0.076 NPTH: ±0.05 |
| 14 | Package: | Inner packing: Vacuum packing / Plastic bag,Outer packing: Standard carton packing |
| 15 | Certificate: | UL,SGS,ISO 9001:2008 |
| 16 | Special requirements: | Buried and blind vias+controlled impedance +BGA |
| 17 | Profiling: | Punching, Routing, V-CUT, Beveling |
Certification: UL, ISO14001, ISO9001, SGS, TS16949, REACH
Our PCBs are used for Satellite transceiver, Microwave sensors, RF transceiver,RF
Transmitter,radar motion module,Microwave Sensor module,radar
motion detector module,RF Power Amplifier, RF Remote Control
Transmitter and so on.
Our Corporate Vision: To become the world's most trustful PCB
Our Corporate Values: Excellence, customer satisfaction, innovation
and integrity, green.
Our Quality Target:
1.Ptoduction pass rate>99%
2.Timely delivery rate>98%
3.Customer complaint rate<1%
4.Customer satisfaction rate>99%
Environmental Guideline:
Protect the environment, prevent pollution, save resources, and
reduce waste.
PCB Manufacture Quality Control:
1. Engineering pretreatment before production
2. 100% E-test, 100% visual inspection
3. AOI inspection
4. High voltage test, impedance control test
5. Micro section, soldering capacity, thermal, shocking test
6. Reliability test, insulating resistance test, ionic cleanliness
testing
