|
[China]
Trade Verify
Address: No.3 Jinle Road, Jinfeng Town,Zhangjiagang City, Jiangsu Province,China
Contact name:Coco
Zhangjiagang Friend Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
0-32mm diameter Fiber Reinforce PPR Pipe Production Extrusion Line
Description:
PPR high performance glass fiber composite tube is composed of three layers of material, the middle layer glass fiber reinforced material, the inner layer is hot water and the outer layer is pp - r imported raw material.The product [1] has higher temperature resistance and low expansion coefficient than ordinary pp-r tube.Only twenty percent of the pp-r pipe, effectively solve the telescopic pipe bending problem, higher compression performance, long service life, high strength, impact resistant performance is better, prevent pipeline sagging phenomenon, is solar energy, heat circulation system, heating system, water supply ideal choice.
PPR Pipe Standard:
1. Final PPR Pipe usage:
2. Raw Material: PPR raw material
3. Pipe Color:Black
4. Color Line:
5. Final Pipe Size and Pressure Level:
6. PE Pipe
| No. | Diameter ( mm ) |
|
| ||
| S5(1.25mpa) | S4(1.6mpa) | S3.2(2mpa) | S2.5(2.5mpa) | ||
| 1 | Φ16 | ||||
| 2 | Φ20 | ||||
| 3 | Φ25 | ||||
| 4 | Φ32 | ||||
| 5 | Φ40 | ||||
| 6 | Φ50 | ||||
| 7 | Φ63 | ||||
Equipment list:
I. Condition
1,Place Indoor
2,Power No danger
3,Humidity 85% non-condensing
4,Temperature 0-35℃
II. Working Condition
1,Power 3P 380V(—10%,+5%) 50Hz
2,Installation Power: 115kW
3,Cold Water: ≤20℃ ≥0.3Mpa 8～105m3/h
4,Air Supply: 0.3m3/min ＞0.5MPa
5,Installation Length: 28.5m
III.
2,Output:
| Extruder Model | Material | Output | Mark |
| SJ65×33 | PPR | 80-100kg/h | |
| SJ25×25 | PPR | 1—2kg/h |
Output will be different according to different raw material and operations condition.
Part I
| NO | Machine name | PCS |
| 1. | SJ65/33Single screw extruder | 1 |
| 2. | Molds (16-63mm ) | 1 |
| 3. | Vacuum forming box | 1 |
| 4. | Water spray tank | 1 |
| 5. | Two claw haul-off machine | 1 |
| 6. | Pipe chipless cutting machine | 1 |
| 7. | Stacker | 1 |
| 8. | SJ25/25 single screw extruder | 1 |
| 9. | Hopper Dryer | 1 |
| 10. | Automatic Loader | 1 |
Part II Machine specifications:
| S/N | Item name | QTY | Specifications |
| 1 | SJ65/33 Single screw extruder
| 1 set | Screw : Diameter of screw: Ф65mm L/D:33:1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.5 ~ 0.7mm, Polishing Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.5 ~ 0.7mm Heating zones: 5 Heating mode: Cast aluminum + stainless steel covering Heating power: 15KW Cooling power: 0.25KW×5 Method of cooling: air blow Driving motor: Motor power: 37KW ( DC motor ) Rotating speed: 7-94rpm Main electric part : HOLIP inverter ( Famous Chinese Brand ) OMRON temperature controller Siemens contactor Jiangyin brand gearbox Zhoushan brand screw and barrel
Self protective system: Over current protective of motor Over pressure protective of screw Weight:2500kg dimension(L×W×H): 3000mm*950mm*1300mm
|
| 2 | Molds (16-63mm)
| 1set | Material: Made by 40Cr. Inner surface polished Calibration: 16-63mm (16,20,25,32,40,50,63 ) Connection head material : 45# carton steel Match with mica heater |
| 3 | vacuum forming box
| 1set | Dimensions: Length: 6000mm Vacuum forming type : spray cooling Spray head: Vacuum pump: SHANDONG vacuum pump Power: 3 kw *2pcs Water pump: Power: 3kw*2pcs SHANDONG vacuum pump Moving motor power: 0.75kw Tank material: 3mm thickness Stainless steel Limit switch Electric cabinet with water-proof protection Water level control system Water temperature control system Outline dimension(L×W×H):6000*1490*600
|
| 4 | Water spray cooling tank
| 1set | Dimensions: Length:6000mm Water pump: Power: 4kw Cooling type : spray cooling
Tank material: 3mm thickness Stainless steel Limit switch Electric cabinet with water-proof protection Water level control system Water temperature control system Outline dimension(L×W×H):6000*1490*600 |
| 5 | Two claw haul-off machine
| 1 set | Tracking type : Caterpillar Haul off type : Two claw Clamping length:(mm)1200 Up and down: ±90mm Hauling speed:(m/min)0.1-2 or required Center height:(mm)1000 Motor brand: Sima motor Motor power:(kw)2.2kw Outline dimension(L×W×H): 2790*2150*1400
|
| 6 | Pipe chipless cutting machine | 1 set | Biggest cutting diameter(mm):20-63 Cutting blade material : high quality tooling steel Cutting blade size : 350mm diameter Cutting motor: pneumatic Motor power(Kw):1.5kw Pipe clamping type : Aluminum die clamped by air cylinder Electrical system: Siemens contactors Taiwan Tend terminal PLC control Up and down: ±90mm Outline dimension(L×W×H): 2910*2170*1240
|
| 7 | Stacker
| 1 set | Pneumatic discharging Length:6,000mm Up and down: ±90mm Outline dimension(L×W×H): 6000*1300*1570 Could be customized by customer’s final pipe length
|
| 8 | SJ25 single screw extruder
| 1 set | Screw : Diameter of screw: Ф25mm L/D:25:1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.5 ~ 0.7mm, Polishing Driving motor: Motor power: 1.5KW Main electric part : HOLIP inverter ( Famous Chinese Brand ) OMRON temperature controller Siemens contactor
|
| 9 | Hopper Dryer | 1 set | Type : 150L Drying power: 6.35kw Fan power: 750w
|
| 10 | Automatic Loader | 1 set | Type : Vacuum material loader Motor: 0.75kw Capacity: 200kg
|
Spare parts:
| No. | Name | |
| 1. | Tool bag | 1set |
| 2. | Siemens contacter | 2pcs |
| 3. | Cutting machine blade | 2pcs |
| 4. | Nylon sealing tape | 5pcs |
| 5. | Air tube | 5meters |
| 6. | Light | 1 pcs |
