Flange Type Load Cell 1000kg Thrust Force Sensor 10kN Compression Force Measurement

Flange Type Load Cell 1000kg Thrust Force Sensor 10kN Compression Force Measurement

Flange Type Load Cell 1000kg is made of stainless steel utilizing strain gauge technology to deliver maximum 0.1% non-linearity of full scale.Traction And Compression Force Sensor  FFA offers 20kg / 50kg / 100kg / 200kg / 500kg / 1000kg / 2000kg seven rated load capacities to choose from, Thrust force transducer FFA can be used for both tension and compression force measurement. Stainless steel construction, flange design, compact size, bidirectional force measurement, high accuracy, Flange to Flange Load Cell FFA offers a perfect force measuring solution for applications such as wire tension control, force distribution analysis, automated control, air cylinder thrust force measurement, assembly force monitoring, spring testing, ultrasonic welding clamp force control, hand press force verification, and so on. In addition to the standard specifications, Forsentek is also capable of and willing to provide custom design service to meet requirements of different applications.

Specifications

Flange Type Load Cell 1000kg Thrust Force Sensor 10kN Compression Force Measurement

A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force. The acting force causes deformation of the measuring element, the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge, under constant power supply, the output signal between Sig+ and Sig- will change proportionally, thus the load/force can be measured by measuring the output signal from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Flange Type Load Cell FFA is normally around 2.0mV/V.
Power supply of Flange Type Thrust Force Load Cell FFA is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Flange Mounted Thrust Force Sensor FFA is normally within 0…+30mV(-30mV...+30mV for Pull And Press Force Measurement).
Example one: Flanged Load Cell FFA-5KN with 2.0mV/V sensitivity powered by 5V DC,the output range is -10mV...+10mV.
Example two: Tension Compression Load Cell FFA-500kg with 1.9mV/V rated output powered by 10V DC, the output range is -19mV...+19mV.

The mV/V output from the wheatstone bridge sometimes can hardly be processed directly, a signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example one: Flange Type Thrust Force Sensor FFA-500kg working with amplifier FSC(0-5V)-24V,the Force-Voltage relationship will be 0-500kg compression force VS 0-5V output, which is linear regardless of the measurement error, 1V output corresponds to 100kg compression load, 2V output corresponds to 200kg compression load, and so on.
Example two: Flange Mounted Compression Load Cell FFA-5kN working with amplifier FSC(4-20mA)-24V,the Force-Current relationship will be 0-5000N compression force VS 4-20mA output, which is linear regardless of the measurement error, 4mA output corresponds to “0” load, 5.6mA output corresponds to 500N compression load, 12mA output corresponds to 2500N tension load, and so on.

Dimensions(Unit in "mm")

Click here to download datasheet