Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Miniature Load Cell 30kg Micro Weight Sensor 20kg Small Weight Transducer 10kg
Miniature Weight Sensor FMZU is strain gauge based to deliver 1.0mV/V output from full
wheatstone bridge. Small load sensor FMZU offers 5kg / 10kg / 15kg / 20kg / 30kg five rated capacities to choose from,high accuracy with maximum 0.05% non-linearity
of the full capacity.The 1000 ohms resistance strain gauges used
are more energy-efficient compared to common 350 ohms gauges.The
compact size and aluminum construction makes FMZU weighs only
about 12 grams which makes it suitable for portable weighing
devices.Small size weight sensor FMZU offers a perfect mixture
of small size,high accuracy and low cost,which makes inexpensive
loadcell FMZU suitable for weight monitoring in consumer
electronics.You may find Miniature Load Sensor FMZU applicable for home appliances, force simulators, process
control, robotics, automotive and so on. Forsentek is also capable
of and willing to provide custom made service if you cannot find
suitable weight/load/force measurement transducers from the
standard product portfolio.
Dimensions
Specifications
| Rated capacity | 5kg / 50N / 11 lb 10kg / 100N / 22 lb 15kg / 150N / 33 lb 20kg / 200N / 44 lb 30kg / 300N / 66 lb |
| Rated output | 1.0 mV/V |
| Excitation | 3-10 V |
| Zero balance | ±0.2mV/V |
| Nonlinearity | ±0.1% of R.O. |
| Hysteresis | ±0.1% of R.O. |
| Nonrepeatability | ±0.05% of R.O. |
| Creep(5min) | ±0.05% of R.O. |
| Safe overload | 120% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift zero | ±0.03% of R.O./oC |
| Temperature shift span | ±0.02% of R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | 32AWG*170mm |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
Small size load cell sensor FMZK is a transducer that converts
mechanical force into electrical signal proportional to the applied
force or weight.The measured load or force causes deformation of
the measuring element(elastic body),the bonded strain gauge deforms
accordingly which will cause the impedance variation of the
wheatstone bridge,under constant power supply, the output signal
changes proportionally, thus the weight or force can be measured by
measuring the output signal from the load cell.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output micro load cell FMZU is around 1mV/V.
Power supply of miniature weight sensor FMZU is normally within
3-10V.
Load / Capacity is within 0-1.
So the output range of weight transducer FMZU is normally within
0-10mV.
Example one: Micro Load Sensor FMZU-20kg with 1.0mV/V powered
by 3.3V DC,the output range is 0~3.3mV.
Example two: Miniature Weight Sensor FMZU-30kg with 1.0mV/V powered by 5V DC,the output range is 0~5mV.
Miniature Load Cell 30kg Micro Weight Sensor 20kg Small Weight Transducer 10kg
