Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Miniature Jr S-beam Load Cell Tension Compression Sensor 2lb 5 lb 10lb 25 lb 50lb 100lb
Miniature jr s-beam load cell FSSM offers a compact design for a variety of applications.
the S Beam Load Cell series provides accuracy, compact design
features, and a wide capacity range from 10N to 1000N to choose
from.The mini load cell FSSM utilizes metal foil strain gauge
technology to deliver 2.0mV/V output with maximum 0.1%
non-linearity of full scale,the compact design enables Micro Force Sensor FSSM to be easily embedded into machinery or test equipment –
ideal for packaging machinery, assembly machinery or end-of-line
test equipment.The sensor features threaded holes on two sides for
the mounting of attachments or implements,this micro force sensor
can be used for both tension and compression force measurement in
applications with limited space.You may find junior S beam load
cell FSSM interchangeable with FUTEK load cell LSB200,Mark
Miniature Force Sensors Series R04,flintec s-beam force sensor
ISA,flintec load cell ISB,etc..In addition to the standard
specifications,model FSSM can also be modified or customized to
better fit clients' applications.
Dimensions(in milimeter)
Specifications
| Capacity | 10N / 1kgf / 2.2 lbf 20N / 2kgf / 4.4 lbf 50N / 5kgf / 11lbf 100N / 10kgf / 22 lbf 200N / 20kgf / 45lbf 300N / 30kgf / 66 lbf 500N / 50kgf / 110 lbf 1kN / 100kgf / 220lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.1% R.O. |
| Hysteresis | ±0.1% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | 10/20N: IP50 50N~1kN: IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shielded |
| Wiring code | Compression@ Green--Signal+ White--Signal- |
Miniature Force Transducer FSSM outputs mV signal from the full
wheatstone bridge which is proportional to the applied load,a load
cell amplifier can be used to convert mV signal into -5-5V / 0-10V
/ 4-20mA for easy signal processing,taking FSSM-100N and
FSC(-10-10V)-24V for example,the load-voltage relationship will be
0-100N compression load VS 0-10V output, 0-100N tension load VS
0-(-10V) output,5V voltage corresponds to 50N compression load, -1V voltage
corresponds to 10N tension force,and so on.
Miniature Jr S-beam Load Cell Tension Compression Transducer 2lb
5lb 10vlb 20lb 50 lb 100 lb
