Forsentek Co., Limited |
|
Subminiature Button Load Cell 50kg 20kg 10kg 5kg Smallest Compression Sensor
Subminiature Button Load Cell FC8E is made of stainless steel based on metal foil stain gauge
technology intended for compression force measurement. 1000 ohms
high resistance strain gauge delivers better stability compared to
commonly used 350ohms gauges, miniature load cell FC8E offers
0-50kg / 0-20kg / 0-10kg / 0-5kg four measuring ranges to
choose from. Smallest button load cell FC8E is featured with
only 8mm outer diameter and 6mm total height which makes it
extremely suitable for force measurement applications with
limited mounting space.Typical applications for transducer FC8E are
such as clamping force measuremen,force overload
protection,load distribution analysis,pressing die force
measurement,auto equipment,assembly line and so on.
Dimensions(unit in milimeter)
Specifications
Capacity | 50N / 5kg / 11lb 100N / 10kg / 22lb 200N / 20kg / 44lb 500N / 50kg / 110lb |
Rated output | 1.0 mV/V |
Excitation | 3-8V |
Zero balance | ±0.1mV/V |
Nonlinearity | ±1% R.O. |
Hysteresis | ±1% R.O. |
Nonrepeatability | ±0.5% R.O. |
Creep(3min) | ±0.5% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.05% R.O./oC |
Temperature shift span | ±0.05% R.O./oC |
Input resistance | 900±100 ohms |
Output resistance | 900±100 ohms |
Insulation resistance | >2000M ohms |
Ingress protection | IP64 |
Material of element | Stainless steel |
Cable | Ø2*4000mm 4-core shielded |
Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gauge deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell which is normally within 0...+10mV for model FC8E. A
signal conditioner can be used to convert mV signal into 0-5V /
0-10V / 4-20mA output, taking Micro Load Cell FC8E-50N working with amplifier FSC(0-5V)-24V for example, the
force-voltage relationship will be 0-50N load VS 0-5V voltage,
1V corresponds to 10N load, 2V voltage corresponds to 20N
force,and so on.
Subminiature Button Type Load Cell Force Sensor 500N 200N 100N
50N Micro Compression Sensor