Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Rotary torque transducer 5NM 2NM 1NM 0.5NM 0.2NM Rotating shaft torque measurement
Shaft to shaft rotary torque sensor FYF is a torque transducer intended for rotating torque measurement,slip rings are used to conduct the millivolt signal from the wheatstone bridge bonded on the sensing shaft which can rotates together with motor shaft and get the torque measured.Rotary torque sensor FYF offers 0-0.1NM / 0-0.2NM / 0-0.5NM / 0-1NM / 0-2NM / 0-3NM / 0-5NM measuring ranges to choose from. Torque meter FYF can be mounted between motor and load through couplings.Model FYF supports maximum 4000RPM rotating speed in both clockwise and counterclockwise direction.Signal conditioner and display unit can also be supplied to display the torque value and output 0-5V/0-10V/4-20mA analog signal.Typical applications for this type of torque cell are for example torque measurement of valves,servo motors,pumps and so on.
Dimensions
Specifications
| Rated capacity | 0.1NM / 0.88 lbf*in 0.2NM / 1.77 lb-in 0.5NM / 4.4 lbf-in 1NM / 8.8 lb*in 2NM / 17.7 lbf-in 3NM / 26.5 lbf-in 5NM / 44 lbf*in |
| Rated output | 1.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(30min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 350±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP40 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- |
A torque sensor is a transducer that converts a torsional mechanial
input into an electrical output signal.Dynamic torque sensor is
designed to measure rotating torque like electric
motor torque,rotating shaft torque,mixture
torque,etc..Connecting with torque meter FPT,the measured torque
can be real-time displayed,FPT also supports RS485 or RS232
communication interface,amplified signal 0-5V/0-10V/0-20mA/4-20mA
is also achievable from FPTC and FPTD.
