Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Button Load Cell 150kN 100kN 50kN 20kN 10kN 5kN 2kN Compression Force Sensor
Button Type Compression Load Cell FC50 is made of stainless steel based on foil strain gauge technology intended for compression force measurement. Button load cell FC50 offers 0-1kN / 0-2kN / 0-5kN / 0-10kN / 0-20kN / 0-50kN / 0-100kN / 0-150kN eight rated measuring ranges with maximum 0.3% non-linearity of the rated output to choose from. Press load cell FC50 can be used for both static and dynamic force measurement.You may find pancake load cell FC50 applicable for force measurement in injection-molding machines, press machines and material testing equipment and so on.
Dimensions
Specifications
| Capacity | 100kg / 1kN / 220lb 200kg / 2kN / 450lb 500kg / 5kN / 1.1klbf 1 ton / 10kN / 2.2klb 2 ton / 20kN / 4.5klbs 5 ton / 50kN / 11.2klb 10 ton / 100kN / 22klb 15ton / 100kN / 33klbf |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±50 ohms |
| Output resistance | 750±50 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP66 |
| Material of element | Stainless steel |
| Cable | Ø4*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- |
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer)
when rated load is applied, expressed in terms of mV/V. The rated
output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output is pancake load cell FC50 is normally around 1.5mV/V.
Power supply of low profile load cell FC50 is normally within
3-15V.
Load / Capacity is within 0-1.
So the output range of universal load cell FC50 is normaly within
0mV...+22.5mV.
Example one: Pancake Load Cell FC50-10kN with 1.5mV/V power by
5V DC,the output range is 0mV...+7.5mV proportional to the applied
load.
Example two: Button Load Cell FC50-20kN with 1.5mV/V power by 10V DC,the output range is
0mV...+15mV proportional to the applied load.
Load cell + Signal amplifier:
The mV output from the loadcell transducer sometimes cannot be
recognized by signal processing units directly,so signal
conditioner is introduced to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing.
Example: Compression Force Load Cell FC50-100kN working with
0-10V amplifier,the load-output relationship will be
0-100kN load VS 0-10V output,0V output corresponds to 0N, 1V
output corresponds to 10kN load, 5V output corresponds to 50kN
force,and so on.
Button Load Cell 150kN 100kN 50kN 20kN 10kN 5kN 2kN Compression
Force Sensor
Click here to download datasheet
