Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Forsentek Co., Limited |
|
|
Smallest load cell 50N 100N 200N 500N smallest force sensor micro force transducer
Subminiature compression load cell FC8E is made of stainless steel
based on metal foil stain gauge technology intended for compression
force measurement.Miniature load cell FC8E offers 0-50N /
0-100N / 0-200N / 0-500N four rated measuring ranges to choose
from. Smallest load cell FC8E is featured with only 8mm outer
diameter and 6mm total height which makes it extremely suitable for
force measurement applications with limited mounting space.Typical
applications for smallest load cell FC8E are such as clamping force measuremen,force overload
protection, load distribution analysis, pressing die force
measurement, auto equipment, assembly line and so on.Micro Force
Transducer FC8E can also be modified or customized to meet
requirements of different applications.
Specifications
| Capacity | 5kg / 50N / 11lb |
| Rated output | 1.0mV/V |
| Excitation | 3-8 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% R.O. |
| Hysteresis | ±1% R.O. |
| Nonrepeatability | ±0.5% R.O. |
| Creep(3min) | ±0.5% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 900±100 ohms |
| Output resistance | 900±100 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø2*4000mm 4-core shieded |
| Wiring code | Red--Excitation+ Black--Excitation- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
The rated output of smallest force sensor FC8E is around 1mV/V.
Power supply of smallest force transducer is within 3-8V.
Load / Capacity is within 0-1.
So the output range of micro loadcell FC8E is normally within
0-8mV.
Example one: Smallest Button Load Cell FC8E-50N with 1.0mV/V sensitivity powered by 5V DC,the output
range is 0...5mV.
Example two: Subminiature Compression Sensor FC8E-100N with 1.0mV/V
sensitivity powered by 3.3V DC,the output range is 0...3.3mV.
An external signal amplifier can be used to deliver -5~5V, 0-10V or
4-20mA output.
Example: FC8E-500N working with amplifier FSC(0-5V)-24V,the
Force-Voltage relationship will be 0-500N force VS 0-5V output,
when you get 3V output,it means the current load is 300N
compression load,when you get 1V output,it means the current load
is 100N compression force,and so on.
Smallest load cell 500N 200N 100N 50N miniature load cell force sensor
