Active Member
|
[China]
Address: 062150,Fuzhuang Development Zone, Botou City, Cangzhou, Hebei Province,China
Contact name:
Xinghe Roll Forming Machinery Co.,Ltd |
|
|
Automatic Change Size C Purlin Roll Forming Machine C60-250 Steel Frame Forming Machine
| NO. | Items | Parameters | Remark | |
| 1 | Suitable Material | Type | GI/PPGI/AL | |
| Thickness | 2.0-3.0mm | |||
| 2 | Product Specifications | Length | Any length | |
| Length Tolerance | ±2mm/6m | |||
| 3 | Working Speed | 25 m/min | Standard machine | |
| 4 | Control System | Mitsubishi/Siemens PLC& transducer | Custom | |
| 5 | Total Power | 6KW | ||
| 6 | Total Weight | About 6.2T | Up to final design | |
Components of C section steel purlin cold roll forming machine:
| No. | Name | Unit | Qty |
| 1 | Manual decoiler | set | 1 |
| 2 | Main forming machine | set | 1 |
| 3 | PLC control system | set | 1 |
| 4 | Hydraulic pump station | set | 1 |
| 5 | Post cut | set | 1 |
| 6 | Electric motor | set | 1 |
| 7 | Output table | set | 1 |
Machine parameter
| Article No. | Item Name | Specification |
| 1 | Width of feeding material | <1000mm coil sheet |
| 2 | Thickness of feeding material | 1.5-3.0 mm coil sheet |
| 3 | Roller station | 8-18 stations |
| 4 | Shaft Diameter | 75-95 mm |
| 5 | Productivity | 8-25 m/min |
| 6 | Rollers' material | Bearing steel |
| 7 | Shaft material | 45# steel |
| 8 | Weight | 9 tons |
| 9 | length | 8-11m |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Control | PLC |
| 12 | Decoiler | 8 Tons |
| 13 | Motor | 22 kw |
| 14 | Driving way | Chain transmission |
| 15 | Chain size | 1.5-2 inch |
| 16 | Cutting system | Hydraulic cutter |
Machine shows
A.One year guarantee for whole machine.
B.24 hours technical support by email or calling.
C.If there is any problem found of the machine, we will repair it
for free in one year.
1. How many years since you have been in this field?
Our company has been producing roll forming machines for almost
20years.
We have rich experience for manufacturing and designing the
machine.
2. Where is the nearest airport?
Tianjin or Beijing, both are ok. Tianjin is nearest.
From Tianjin to Cangzhou, the high speed train, it takes only 30
minutes.
From Beijing to Cangzhou, it takes only 51 minutes.
We will go to Cangzhuo railway station to pick you up, if you come
to visit our factory.
3. How about your quality and price?
Our machine uses the advanced technique, we are leading in this
field.
Most of other roll forming machine factories, their boss are
students of our general manager. We always leads first in this
field.
The quality is among the highest.But the price is not high, it is
low. Because our rich experience help us to do the highest quality
machine but with lowest cost. Then our price is not high.
Our products are widely used in various industrial factory. And if you are interested in our products, please feel free to contact us ! Thank you!
