2018 Forimi high quality portable 65VA micro dermabrasion machine for beauty center use

2018 Forimi high quality portable 65VA micro dermabrasion machine for beauty center use

Overview

The Micro-crystal MicroDermabrasion was designed by Italian Florence’s Mattioli at first, until now had over 20 years’ history. This kind of technology only supplies to the dermatology expert and doctor at first uses, but more and more SPA House & Beauty Salon also gradually uses, it was called the best method of medical beauty. This method successfully has developed in Europe for several years, cures patient thousands of examples, and has obtained the extremely satisfactory effect.

Now we want to introduce the Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion. The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up. This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health. The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin

Advantages

Specifications

Befor&After

Preparation before treatment
1.A consultation included the examination of the skin, a plan for treatment. Operator should wear vinyl gloves and a facemask.
2. On oily or acne skin, a steamer may be used prior to the treatment, or a degreasing lotion may be applied prior to the cleanser.
3.Cleansing the skin with Cleansing gel or water, then wipe off with cotton pad. Allow the skin to dry.

Operating Instruction for Diamond Dermabrasion
1.Before use the machine, please screw out the output nozzle in the machine, and then check there is one O-ring attached the nozzle or not, and also check the cotton filter in the nozzle is new or not. We recommend exchange the new cotton filter every treatment.
2. Connect the Silicone hose from the output nozzle to the Diamond Peel pen.
3. Tight up the Diamond Head on the hand piece. Please make the Diamond Head connects well with the diamond pen, or else there is one risk to loose pressure.
4. Turn on the power switch.
5. Adjust the Vacuum intensity by Vacuum Regulator according to the following reference table, the intensity displays on Vacuum gauge and check with the client for comfort.
6. Use the incline area of Hand piece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the hand piece at one spot for too long, doing so will cause harm to the skin.
7. Adjust the crystal flow rate by the Vacuum Regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better comfort intensity.
8. Gently stretch the skin with thumb and finger and glide the Hand-piece 2 to 3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites.

About Our Factory:

Beijing Forimi S & T Co., Ltd is the professional manufacturer of beauty equipment,

medical equipment, Skin Analyzer System Beauty Salon products and so on.

Our company was built in 2003, we have our own R & D department of 12 staffs and

our own factory so we can provide best professional OEM and ODM services for the

distributors around the world. In beauty equipment industry, our factory is the

biggestone in China, it includes several production lines, material library, shipping

department, inspection area. We prove that no failure products sent to

our customers.

Snow

Beijing Forimi S & T Co ,Ltd

Address:Room 805, Huasheng International Mansion, Beijing, 10060