The bendable, weldable and highly abrasion-resistant steel.
Hardox® 500 is a bendable and weldable abrasion-resistant steel,
with a nominal hardness of 500 HBW. Suitable for applications that
demand higher wear resistance.
Hardox® 500 increases payload and increases service life while
maintaining good processability and toughness.
Thickness guarantee - hot rolled plate. The thickness tolerances
according to SSAB´s thickness guarantee are closer than those
specified in EN 10 029 except for ≥ 80 mm, for which the tolerance
range is according to standard.
Nominal thickness (mm)
Steel thickness (mm)
|3.2 - 4.9||-0.3||+0.3||0.4|
|5.0 - 7.9||-0.3||+0.4||0.5|
|8.0 - 14.9||-0.5||+0.4||0.6|
|15.0 - 24.9||-0.6||+0.4||0.6|
|25.0 - 39.9||-0.7||+0.8||0.7|
|40.0 - 79.9||-0.9||+1.4||1.2|
|80.0 - 160.0||-1.1||+2.1||1.5|
Other tolerance classes within the above defined tolerance ranges
can be supplied after agreement.
Thickness tolerance - extra close can be supplied after special
agreement for plate.