Intruduction: - Applications of metal detectors: Quarries, Lime works, Clinker
works, Sand pits, Cement factories, Slag processing, Building
material recycling, Brickworks, Coal-burning power stations.
- Digital signal processing:Every data is controlled by
Microprocessor. Signal processing is fulfilled by the digital
circuit which is easy for adjustment, stable and reliable. To stop
mistaking in transmission & reception in advance, the detector
handles many operations. Easy to adjust the detecting parameters.
- Detection signal shall be sent out when metal signal is detected,
and then the elimination device shall eliminate the object with
metal impurities or send out sound-light alarm stop signal.
- Has the function of one-line signal display. When metal
substance is passing through, the signal level indicator shall
display different induction intensity according to the size of
metal.•
- Product memory:Memory function for registering various products
(Max. 12 Items).Each product information is input in advance for
detecting many kinds of product. Then operator can inspect every
kinds of products if operator loads each product information.
- High immunity against vibration & product metal effect:Operator
can check if the detector cope with product character and if the
detector detect smoothly without mis-operating caused by great
impact or vibration.
- Chinese & English operating menu:LCD Display is showed in
English and Chinese. It is easy to interface between multinational
person and detector.
- Extremely simple to install.The probe consists of 2 probe panels,
one fitted under the belt and the other above the belt by means of
spacers. It is quick and easy to install at the conveyor belt.
- Iron oxide and ore are ignored
- Both ferrous and non-ferrous metals are detected
- Automatic self-monitoring
-
- Probe and amplifier solidly built for immunity to vibration and
therefore resistant to weather, dirt and impact of stones
- The sensitivity determines the minimum size of metal parts which
can be detected. Depending on the individual model and the
sensitivity setting, metal parts down to the size of M10 nuts or
the size of excavator teeth are detectable.
- The unit can be integrated into an existing plant control system
without any extra components. An On and Off button and a contactor
for the conveyor belt motor are generally present. The output relay
for the metal signal can be switched between normally relaxed and
normally activated mode. On request an extended terminal strip can
be supplied, which permits direct connection of a flashing warning
light, an alarm horn or a marking device.
|
|