Jiangsu RichYin Machinery Co., Ltd |
|
HTL-120 Automatic flat mask production line
Machine introduction
HTL-120 flat mask one drag two outer ear band machine is a fully automatic high-speed flat ear band mask production line newly developed by Jiangsu Haitel Machinery Co., Ltd, Ultrasonic fusion, molding, cutting and other full-process automation, complete the entire production process from the raw material of the coil to the finished mask
Technical Parameters:
Equipment size | 6150mm (L) × 3720mm (W) × 1950mm (H) (excluding receiving line) |
Appearance color | international standard warm gray 1C (DB standard color) |
Equipment weight | ≤5000kg, ground load ≤500KG / m2; |
Compressed air | 0.5 ~ 0.7 MPa, the use flow rate is about 300L / min |
Working power | equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW |
Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable or corrosive gas Body, no dust (cleanliness no less than 100,000) |
Production efficiency | 90-130PCS / MIN; |
Equipment production pass rate | 99% (except when the incoming materials do not meet the requirements or the employees' improper operation is excluded) |
Common medical masks: It consists of three layers of non-woven fabric, the inner layer is ordinary non-woven fabric; the outer layer is non-woven fabric with waterproof treatment, which is mainly used to isolate the liquid sprayed by patients; Electret-treated polypropylene melt blown nonwoven fabric.