1. Back lifting system: controlled by silent double gas spring, it
has strong load-bearing and good stability.
2. High and low lifting system: controlled by imported oil
cylinder, the quality is more stable. There are 5 circular cylinder
protection sleeves made of ABS injection molding on the outside of
the hydraulic cylinder. The overall color is coordinated, which is
not easy to accumulate dust and easy to clean.
3. Bed board: made of anti Beite material, with higher strength and
no deformation.
4. Frame: made of high-quality steel elbow welding.
5. Guardrail board: PP resin molding guardrail boards on both
sides, with a height of 300mm, better safety protection, and can
also be fixed horizontally to increase the width of the bed, so
that the arms of the infusion patients can be placed comfortably;
The utility model has a double safety lock for locking to prevent
misoperation and improve the safety of operation.
6. The angle display is set on the guardrail plate to facilitate
understanding the rising angle of the back during nursing; There
are grooves in the middle of the guardrail plates on both sides to
prevent the catheter from sliding and facilitate infusion and
drainage. Each side of the guardrail is riveted by 5 die-casting
aluminum and 11 stainless steel rivets, with high strength. There
is a transparent anti-oxidation layer on the surface of die-casting
aluminum to prevent rust spots caused by oxidation reaction for a
long time.
7. Casters: four casters with a diameter of 200mm are used for
central locking. The four corners of the cart are equipped with
caster control system, one foot braking and four wheels are fixed
at the same time.
8. The central control brake linkage rod is formed with an
integrated round tube to ensure higher strength.
9. Independent central fifth wheel system: control pedals are
installed on both sides of the cart, which can move freely when the
central fifth wheel is retracted; When in use, it is in the
"straight" state (the step bar is 105mm above the ground and has
better trafficability), which overcomes the inertial force in the
transportation process, effectively controls the forward direction
and makes the transportation process safer.
10. There is an integrated tray under the bed, which can place
oxygen bottles. It is easy to use, and the tray can bear 10kg.
11. Both sides below the side of the bed are equipped with infusion
racks, which can be fixed and collected.
12. Mattress: the surface of the fabric is waterproof, easy to
clean, equipped with zipper, the external fabric can be washed, and
the 7 cm sponge is comfortable to lie down.
13. There are anti-collision wheels and anti-collision blocks
around the bed, which have a beautiful appearance to prevent
collision in the implementation process, and can play a protective
role.
14. Push handle: a P-shaped push handle is set at the head of the
bed, with foaming treatment on the surface, comfortable grip, and
can be folded and put down when not in use, so as to facilitate
medical staff to take first-aid measures. There is a U-shaped
handle at the end of the bed, and the surface is soaked with
plastic to improve the grip and beauty.
15. Spray the steel bed frame, conduct electrophoretic treatment
after pickling and phosphating, and then spray powder for
double-layer spraying, which has better protection.
Configuration list:
1. 1 bed body; 2. 2 integrated guardrails; 3. 4 central control
casters; 4. 4 sets of central control locking pedal; 5. One set of
the fifth wheel of the center; 6. 2 integral lifting oil cylinders;
7. 2 back lifting air springs; 8. Knee handle 1 8. One integrated
bottom tray; 9. 1 infusion stand; 10. 4 jacks of standard infusion
stand; 11. 1 WATERPROOF mattress; 12. 1 recording desk (optional);