Active Member
|
[China]
Address: Shaxi Town, Taicang City, Suzhou City, Jiangsu Province, China
Contact name:Jack Liao
Zhu Tang (Suzhou) Technology Co., Ltd. |
|
|
PLC Control System Transformer Coil Winding Machine For Handling Three Same Coil
Description
PLC Control System Transformer Coil Winding Machine For Handling Three Same Coil ZPX400-3 is a professional equipment. This kind of winding machine can be used to winding round or flat copper wire, round or flat aluminium wire, wind different shapes of coil, such as circle, oval and rectangular, etc., lay wire automatically, count the number of turns, preset the parameters, wind three same specifications of coils at once. The coil winding machine has uninterruptible power supply, even the power is off suddenly, the machine can save the parameters input before.
Main Features
Technical Parameters
Typical standard specifications of ZPX400-3 are shown below, however these can be easily modified as requested.
| Center Height from Floor: | 900 mm |
| Rotating Shaft Size: | 40*40*1500 mm |
| Shaft Connecting Mode: | Fixed or dismountable (optional) |
| Round Wire Diameter: | 0.3-4.0 mm |
| Max. Flat Wire Size: | 5x12 mm |
| Minimum Finished Coil ID.: | Depends on your mold (shaft size 40*40 mm) |
| Finished Coil OD.: | Max. 800 mm |
| Max. Each Finished Coil Height: | 400 mm |
| Insulation Decoiler Number: | 1 pc |
| Winding Motor Power: | 11 kw |
| Rotating Speed: | 0-160 rpm |
| Max Finished Coil Number: | 3 pcs |
| Control system: | PLC |
| Spread Pitch: | Min. step: 0.01 mm |
| Counter: | 5-digit counting |
| Max. Turns Number Preset: | 9999.9 |
| Counting Range: | 0 - 9999.9 |
