Guangzhou Xingjin Fire Equipment Co.,Ltd. |
Verified Suppliers
|
|
Data Center 120L Network Fm200 Fire Suppression System with Pipeline
Data Center 120L Network Fm200 Fire Suppression System Professional Manufacturers Direct Sales Quality Assurance
Red 120L FM200 Automatic Fire Suppression System Low Maintenance High Safety With Advanced Features
Description:
A professional FM200 Fire Suppression System is a type of fire
suppression system that uses the clean agent FM200
(heptafluoropropane) to extinguish fires in a safe, efficient, and
fast way. It is typically installed and maintained by licensed
professionals who have the necessary expertise, training, and
certifications to ensure that the system is designed, installed,
and maintained to the highest standards of safety and
effectiveness.
The FM200 Fire Suppression System uses FM200 gas to extinguish
fires by releasing it into the protected area to rapidly lower the
temperature and suffocate the flames. The FM200 gas suppresses the
fire in seconds, allowing valuable property and assets to be
protected while minimizing damage, downtime, and environmental
impact.
A professional FM200 Fire Suppression System supplier and installer
typically offers a range of services, including system design,
installation, testing, commissioning, training, and ongoing
maintenance and support. They work closely with the client to
identify the specific risks and requirements of the protected area,
such as data centers, server rooms, museums, or archives, to ensure
that the system is tailored to meet those needs.
Overall, a professional FM200 Fire Suppression System ensures the
highest level of protection for valuable assets and equipment, and
it is a preferred solution for areas where traditional water-based
fire suppression systems may cause damage or where the use of
chemical agents or gases is not preferred or prohibited.
The FM200 gas is stored in cylinders and released into the
protected area through a piping network when a fire is detected.
The gas quickly and effectively suppresses the fire by removing
heat from the combustion process and breaking the chain reaction of
the fire. The FM200 Fire Suppression System is designed to
extinguish fires in seconds, minimizing potential damage and
downtime.
The FM200 Fire Suppression System is typically used in high-risk
areas such as data centers, server rooms, laboratories, museums,
and archives. It is activated automatically by heat or smoke
detectors or manually by a pull station.
Overall, the FM200 Fire Suppression System is a reliable and
effective solution for fire protection in areas where traditional
water-based fire suppression systems are not appropriate. The
system is safe for humans, environmentally friendly, and causes no
damage to materials or equipment. It is best installed and
maintained by licensed professionals with experience in fire
suppression systems.
Applications:
Electronic computer room, a data processing center, telecommunications facilities, process control, expensive medical equipment, industrial equipment, library, museum and art gallery, clean room, anechoic chamber, emergency power facilities, flammable liquid storage area, etc.
Compositions:
120L network Fm200 Suppression with pipeline is mainly composed by three parts. Extinguishing devices and pipe fittings and electrical accessories.
Extinguishing devices are such things, like cylinder to fill and store fm200, frame and driving device(nitrogen cylinder) to trigger the storage cylinder to discharge agent and so on.
Pipe fittings are those conduits to connect extinguishing device and guide agent into protective zone, like high pressure galvanized steel pipe and flange and elbow and so on.
Electrical accessories are those things which are used to detect and monitor whole protective area and control whole system, also warn people to evacuate and prevent from fire expansion.
These integrated three parts will be efficient to detect and supervise and alarm and extinguish fire automatically.
Here attached below is complete composition of whole system,
Parameter:
No. | specification | Technical Parameter | |
1 | Filling pressure | 4.2Mpa | 5.6Mpa |
2 | Scale of Protective region for one zone | area:max single-zone is 800m2 volume:max single-zone is 3600m3 | |
3 | Spraying time | ≤10s | |
4 | Filling density | ≤950kg/m3 | ≤1080kg/m3 |
5 | power | DC24V/1.6A | |
6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) | |
7 | Condition of reserving room for container | temperature: -10~50℃, relative humidity: ≤97% | |
8 | max working pressure | 5.3Mpa | 8.0Mpa |
9 | min working pressure | 4.2Mpa | 4.6Mpa |
Advantages:
A good system might have a lot of advantages, so here is going to show customers some strong points of this system.
1/ Flexible application in protection zones. As its structure and assembly of other useful components, it can concentrate one very big protection zone with the combination of multiple storage cylinders. Its coverage can be also very small with the system of a single cylinder.
2/ Efficient spraying of gas. One set of pipe network system can make the discharge on average for big zones in a short time with the help of the deployment of the pipeline.
3/ Combined distribution system. The most distinctive and flexible advantage of this system is combined distribution system, which will combine multiple rooms in one district or building but with different dimensions or in different floor. Meanwhile, it can reduce the cost based on the original by the least and safe utilization of fire extinguishing gas. Because of the adoption of selective valves that can guide the fire extinguishing gas into the room on fire, so it would be relatively smarter to monitor each room to avoid an accident. It is worthy to mention that the combined rooms should be less than 8 including 8 in accordance with our standard.
Company Introduction:
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by
convenient transportation and beautiful environment, is located in
Guangzhou, which plays an important role in communication between
China and the world. We are a manufacturer, and we devote ourselves
to the study and development of HFC-227ea (FM200) productions with
our professional and mature team including the program design team,
the skillful installation team, the quality detecting team and the
after-sell service team. Nowadays, our popular fm200 products are
widely used, such as the pipe network FM200 fire suppression
system, the cabinet type FM200 fire suppression system, the
automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system
and automatic fire suppression tube. As a result of high-quality
products and services as well as the good reputation, our company
is well-received by the customers in around the world.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all
products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove
all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong,
China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a
taxi or come here by subway. If you come here by subway, you need
to take the line four and get off at Shiqi station. Then walk out
the station for taking No. 126 bus and get off at Yuexi station.