Guangzhou Xingjin Fire Equipment Co.,Ltd. |
Verified Suppliers
|
|
Piping Hfc-227ea Fm200 Fire Extinguishing System For One Zone
parameter:
No. | specification | Technical Parameter | |
1 | Filling pressure | 4.2Mpa | 5.6Mpa |
2 | Scale of Protective region for one zone | area:max single-zone is 800m² volume:max single-zone is 3600m³ | |
3 | Spraying time | ≤10s | |
4 | Filling density | ≤950kg/m3 | ≤1080kg/m3 |
5 | power | DC24V/1.6A | |
6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20℃) | |
7 | Condition of reserving room for container | temperature: -10~50℃, relative humidity: ≤97% | |
8 | max working pressure | 5.3Mpa | 8.0Mpa |
9 | min working pressure | 4.2Mpa | 4.6Mpa |
Description:
FM200 fire extinguishing system, also known as HFC-227ea, is a
gaseous fire suppression system. It is designed to extinguish fires
quickly and efficiently in critical areas where water-based fire
suppression systems would be detrimental to sensitive equipment or
materials.
FM200 is a colorless, odorless, and electrically non-conductive gas
that leaves no residue after discharge. It is free of
chlorofluorocarbons (CFCs) and has a low global warming potential.
The gas is stored in cylinders under high pressure and is released
into the protected area through a piping network when the system is
activated.
The system comprises of FM200 cylinders, release valves, detection,
and actuation devices, piping, and discharge nozzles. The detection
and actuation devices include heat detectors, smoke detectors,
manual call points, and pre-action systems.
When a fire is detected, the system is triggered to release FM200
gas into the affected area, extinguishing the fire by lowering the
oxygen concentration to a level where combustion cannot occur. The
FM200 gas is distributed through the piping system and nozzles to
the protected area. The system is designed to provide fast and
effective fire suppression with minimal disruption to the protected
area, occupants, and assets.
FM200 fire extinguishing systems are commonly used in data centers,
telecommunications facilities, clean rooms, museums, archives, and
other areas containing critical equipment or sensitive materials
where water-based fire suppression systems would damage or destroy
the contents.
Applications:
1. Clean gas, colorless and tasteless and non-corrosive
2. Electric insulation, utilization for extinguishing of electrical combustion
3. No residue and pollution inside protection zone
4. No damage to ozone layer
Competitive Advantage:
1. Management of multiple zones
2. Efficient fire protection in big region
3. Less occupation in fire-controlled space
4. Relatively cheap price than cabinet or hanging type if zone is big and multiple
Composition:
1. Mechanical parts: cylinder with container valve, frame for cylinder group, driving cylinder, frame for driving device, high pressure hose etc. It is mainly used for storing fm200 agent
2. Electrical parts: smoke detector, heat detector, bell etc.
3. Pipe fittings: conduit, connector, elbow, flange etc.
Attention:
1. Choice for storage room, including ambient environment and volume
2. A separated storage for fm200 fire suppression system
3. Design of pipeline, including placement of conduits and connection
4. Installation, integration of each parts and connection between parts
Company Introduction:
Guangzhou Xingjin Fire Equipment Co., Ltd., which is situated in
Guangzhou, which is a key hub for communication between China and
the rest of the globe, is surrounded by easy access to transit and
a stunning natural environment. We are a manufacturer, and our
professional and experienced staff, which includes the program
design team, the skillful installation team, the quality detecting
team, and the after-sell service team, devotes its time to the
study and development of HFC-227ea (FM200) products. The pipe
network FM200 fire suppression system, the cabinet type FM200 fire
suppression system, the automatic FM200 fire extinguisher (ceiling
mounted style), the fire detecting tube suppression system, and the
automatic fire suppression tube are currently among the most
commonly utilized of our well-known FM200 products. As a result of
high-quality products and services as well as the good reputation,
our company is well-received by the customers in China.
Part Cases Show:
• In Sichuan province, the project cases are Bei Xin Run Yuan, Dong
Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School,
Wal - Mart near ASCB, New Hope Building, Xin Yi Zi Jin City,
Tobacco Building, etc.
• In Guangdong province, the project cases are GAC Group, 10086 in
Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air
Controller, Yingfu Building in Shenzhen, Bank of Communication in
Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV
Station, etc.
• In Shandong province, the project cases are Lushang Office
Building, Lushang Marketing Center, etc.
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all
products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove
all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a trading company or a manufacturing, first?
A1: We are a producer.
Q2: Do OEM items exist?
A2: Your own artwork and design are appreciated.
Q3: Where is your factory located? Can I go there?
A3: Shilou, Panyu, Guangzhou, Guangdong, China is where our factory
is located. Yes, of course. We always look forward to seeing you.
Q4: How can I get to your plant ?
A4: You can take a taxi or take the subway to get here because of
how easily it can be reached. If arriving by subway, you must take
the line 4 and alight at the Shiqi station. Take the No. 126 bus
out of the station after that, and get off at Yuexi station.