Flyrom Technology Co.,Limited |
|
1000BASE-T Copper SFP Transceiver
Features:
*Up to 1.25Gb/s bi-directional data links
*Hot-pluggable SFP footprint
*Extended case temperature range (-40°C to +85°C )
*Fully metallic enclosure for low EMI
*Low power dissipation
*Compact RJ-45 connector assembly
*Detailed product information in EEPROM
*+3.3V single power supply
*Access to physical layer IC via 2-wire serial bus
*Compliant with SFP MSA
*Compliant with IEEE Std 802.3TM-2002
*Compliant with FCC 47 CFR Part 15, Class B
*RoHS Compliant Products
Media Type: | Copper |
---|---|
Maximum Distance: | 100m |
Supported Data Rate: | 1000 Mbps |
Supported Applications: | 1000Base-T |
Temperature Range: | Standard 0°-70°C |
Connectors: | RJ45 |
Chipset: | MAXIM, MINDSPEED, SEMTECH, UX |
Power: | +3.3V single power supply |
Compliance: | CE, INF-8074i, RoHS, SFP MSA |
Description:
FR-1000T 1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.
The FR-1000T supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The FR-1000T provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.
Applications:
High-speed electrical interface, transmission line-SFP
Host-SFP | ||||||
Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
Single ended data input swing | Vinsing | 250 |
| 1200 | mV | Single ended |
Single ended data output swing | Voutsing | 350 | 100 | 800 | mV | Single ended |
Rise/Fall Time | Tr,Tf |
| 175 |
| psec | 20%-80% |
Tx Input Impedance | Zin |
| 50 |
| Ohm | Single ended |
Rx Output Impedance | Zout |
| 50 |
| Ohm | Single ended |
All our fiber transceivers are 100% compatible with major brands like Cisco, Huawei, Extreme, HP, Finisar, Broadcom, Foundry, Alcatel, D-link, Enterasys, Netgear, Juniper, Nortel, Linksys, Allied, Zyxel, Dell, Redback, H3C, ZTE, Ruijie, Ciena , Alcatel-lucent, etc.,
We provide OEM/ODM service to our customers,Our price is far lower than our competitors due to our good material sourcing at lower cost.
We will work hard to fit your minimum quantity orders and also organized and schedule all shipping to your office.